Category Archives: Import & Customs / 进口清关

Import & Customs / 进口清关

Reefer containers for food exports face a new fitness-inspection regime from 1 October: GACC Announcement No. 136

  • On 8 September 2026 the General Administration of Customs (GACC) issued Announcement No. 136 of 2026 on container fitness inspection for exports of perishable foods and frozen products; the new regime applies to exports from 1 October 2026.
    海关总署2026年9月8日发布2026年第136号公告,规范装运出口易腐烂变质食品、冷冻品的集装箱适载检验工作;新机制自2026年10月1日起适用于相关出口业务。
  • The scope is defined by a dynamic product-code list: the tariff codes of perishable and frozen foods subject to fitness inspection are published on the GACC portal (at the import-export food safety page), and the list is dynamically managed — mixed consignments must be checked code by code.
    适用范围采用动态编码目录管理:须实施集装箱适载检验的易腐烂变质食品、冷冻品编码在海关总署门户网站(进出口食品安全栏目)公布并动态调整——拼柜混装业务必须逐项核对编码。
  • The inspection model shifts from “pre-inspection by enterprises plus sampling by customs” to “enterprise compliance assurance plus customs review and spot checks”: before loading, the carrier, container-stuffing unit or its agent submits an application via the China International Trade Single Window and uploads a Container Fitness Conformity Declaration.
    适载检验模式由”企业预检+海关抽检”优化为”企业合规保证+海关审核抽查”:装运前,承运人、装箱单位或其代理人通过中国国际贸易单一窗口出境集装箱适载检验模块提交申请,并上传《出口集装箱适载符合性声明》。
  • Fitness-inspection results are valid for 21 days and expire automatically; at export declaration, customs validates the result electronically, and declarations that fail validation are rejected — meaning a missed or expired inspection stops the shipment at the border paperwork stage.
    适载检验结果21天内有效,逾期自动失效;出口申报时海关对检验结果进行校验核销,校验不通过的报关单依法退单——漏检或过期即意味着货物卡在报关环节。
  • Food producers and exporters carry the primary self-inspection duty: they must self-check containers and use only boxes that are clean, hygienic, refrigerated and sealed-tight (清洁、卫生、制冷、密固) as fitted for the goods.
    食品生产经营者承担自检主体责任:必须对集装箱自检,选用清洁、卫生、制冷、密固合格且与拟装货物相适应的集装箱装运。
  • Applications go to the customs office where the container is stored, not the port of export — a detail that matters for stuffing inland; the change operationalises the Commodity Inspection Law and its implementation regulations for cold-chain exports.
    检验申请提交给集装箱存放地海关而非出口口岸海关——内陆装箱场景尤须注意;本次调整是《进出口商品检验法》及其实施条例在冷链出口环节的落地操作。

Reefer containers for food exports face a new fitness-inspection regime from 1 October: GACC Announcement No. 136 | 出口食品冷冻品集装箱适载检验新规10月1日实施:海关总署136号公告解读

Overview

On 8 September 2026, the General Administration of Customs (海关总署) published Announcement No. 136 of 2026 (海关总署公告2026年第136号) on the fitness inspection of containers used to ship perishable foods and frozen products for export, with an official policy interpretation released on 9–10 September. The regime takes effect for exports from 1 October 2026 and supersedes inconsistent prior rules.

The legal basis is the Commodity Inspection Law (《进出口商品检验法》) and its implementation regulations: containers carrying export perishable food and frozen products must pass cleanliness, hygiene, refrigeration and tightness fitness inspection before loading; uninspected or failed containers may not be used. The announcement re-engineers how that statutory requirement is administered.

Who does what under the new regime

Food producers and exporters hold the primary responsibility: they must self-inspect containers and select only those that are clean, hygienic, refrigerated and tight (清洁、卫生、制冷、密固) and suited to the goods — for refrigerated units, the cooling performance and temperature capability must match the cargo.

Carriers, container-stuffing units or their agents must, before loading, submit a fitness-inspection application through the China International Trade Single Window (中国国际贸易单一窗口) outbound-container fitness-inspection module to the customs office at the container’s storage location, uploading the Export Container Fitness Conformity Declaration (《出口集装箱适载符合性声明》).

Customs reviews the conformity declaration and conducts spot checks of containers; only upon a passing outcome may the container be loaded with the export food or frozen products.

The product-code scope

The perishable and frozen food codes subject to fitness inspection are published on the GACC portal (via the import-export food safety pages, at jckspj.customs.gov.cn) and are dynamically managed. Because the list moves, consignment screening must be code-based rather than category-based — mixed containers that mix covered and non-covered goods are the classic miss.

The 21-day validity and export validation

Fitness-inspection results are valid for 21 days and expire automatically. At export declaration, the customs information system validates and writes off the inspection result; declarations that fail validation are rejected (退单) under the law. Operationally, this means the inspection must be timed against the shipping schedule — a container inspected too early relative to vessel space and stuffing dates will need re-inspection, and a shipment presented without a valid result stops at the declaration stage.

Why the model changed

The official interpretation explains the shift: under the Commodity Inspection Law’s conformity-assessment framework, the previous model of enterprise pre-inspection plus customs sampling is replaced by enterprise compliance assurance plus customs review and spot checks. The conformity declaration formalises the enterprise’s assurance, and customs resources concentrate on risk-based verification. The system also adds electronic validation at export, closing the loop between inspection and declaration.

What this means for food FIEs and exporters

  • Build the timeline backwards from vessel cut-off. The 21-day validity window plus the customs review and spot-check cycle means inspection bookings should track stuffing dates, not booking dates.
  • File at the storage-location customs office. For inland stuffing — a growing pattern for Central and Western China food producers — the application goes where the container sits, not where the vessel sails.
  • Prepare the conformity declaration as a controlled document. It is the enterprise’s compliance assurance on record; errors or overbroad statements create exposure if a spot check contradicts it.
  • Re-check the code list at every consignment. Dynamic management means yesterday’s classification of a SKU is not today’s; assign the check to the documentation step, not to habit.
  • Brief carriers and stuffing contractors. The filing obligation sits with the carrier, stuffing unit or agent — foreign-invested food exporters should ensure their logistics contracts assign the task and the deadline explicitly.

Sources

  • 中华人民共和国海关总署 — 海关总署公告2026年第136号(关于装运出口易腐烂变质食品、冷冻品集装箱适载检验工作的公告)正式文本PDF(2026年9月8日): http://www.customs.gov.cn/customs/attachDir/2026/09/%E6%B5%B7%E5%85%B3%E6%80%BB%E7%BD%B2%E5%85%B3%E4%BA%8E%E8%A3%85%E8%BF%90%E5%87%BA%E5%8F%A3%E6%98%93%E8%85%90%E7%83%82%E5%8F%98%E8%B4%A8%E9%A3%9F%E5%93%81%E3%80%81%E5%86%B7%E5%86%BB%E5%93%81%E9%9B%86%E8%A3%85%E7%AE%B1%E9%80%82%E8%BD%BD%E6%A3%80%E9%AA%8C%E5%B7%A5%E4%BD%9C%E7%9A%84%E5%85%AC%E5%91%8A.pdf
  • 中华人民共和国海关总署 — 政务公开·海关总署公告栏目(136号公告发布及2026年9月9日官方政策解读条目): http://gec.customs.gov.cn/customs/302249/index.html
  • 海关总署进出口食品安全局 — 实施集装箱适载检验的易腐烂变质食品、冷冻品编码公布页面(公告指定编码目录入口): http://jckspj.customs.gov.cn/spj/zcfg18/index.html

Related reading

  • see also: food export registration and filing for FIE producers (food-export-registration)
  • see also: cold-chain logistics compliance for imported foods (cold-chain-import-compliance)

出口食品冷冻品集装箱适载检验新规10月1日实施:海关总署136号公告解读

概述

2026年9月8日,海关总署发布2026年第136号公告,规范装运出口易腐烂变质食品、冷冻品集装箱的适载检验工作,并于9月9日至10日发布官方政策解读。新机制自2026年10月1日起适用于相关出口业务,此前规定与公告不一致的以公告为准。

法律依据是《进出口商品检验法》及其实施条例:装运出口易腐烂变质食品、冷冻品的集装箱须经清洁、卫生、冷藏、密固等适载检验,未经检验或检验不合格的不准装运。公告重构了这一法定要求的执行方式。

新机制下的分工

食品生产经营者承担自检主体责任:必须对集装箱自检,只选用清洁、卫生、制冷、密固合格且与拟装货物相适应的集装箱——冷藏箱还须核对制冷效能与温度能否达到拟装货物要求。

承运人、装箱单位或其代理人须在装运前通过中国国际贸易单一窗口出境集装箱适载检验模块,向集装箱存放地海关提交检验申请,并上传《出口集装箱适载符合性声明》。

海关对符合性声明进行审核、对集装箱进行抽查;合格后方可装运出口相关货物。

商品编码范围

须实施适载检验的易腐烂变质食品、冷冻品编码在海关总署门户网站公布(进出口食品安全栏目,jckspj.customs.gov.cn),并动态管理。目录会变,因此拼柜筛查必须按编码进行、不能按品类经验判断——覆盖与不覆盖商品混装的柜子是最典型的漏判场景。

21天有效期与出口校验

适载检验结果21天内有效,逾期自动失效。出口申报时,海关信息化系统对检验结果自动校验核销;校验不通过的出口报关单依法退单。操作上,检验时点要对着船期倒排——过早检验会遇到过期,无有效结果的货物在申报环节即被拦下。

模式为何调整

官方解读说明了变化逻辑:按照《进出口商品检验法》关于合格评定程序的规定,适载检验模式由“企业预检+海关抽检”优化为“企业合规保证+海关审核抽查”。符合性声明把企业的合规保证落到书面,海关资源集中到风险抽查;系统还在出口环节增加自动校验,把检验与申报闭环衔接。

对食品外资企业与出口方的启示

  • 从船期截关倒排时间线。 21天有效期叠加审核抽查周期,检验预约应跟踪装箱日期而非订舱日期。
  • 在存放地海关申报。 对内陆装箱——中西部食品产区日益普遍的模式——申请提交给箱子所在地的海关,而非出运口岸。
  • 把符合性声明当作受控文件管理。 它是企业合规保证的书面记录;抽查结果与声明不符时,夸大或错误的表述会形成风险敞口。
  • 每票货物重新核对编码目录。 动态管理意味着昨天的SKU归类未必适用今天;把核对动作固定在制单环节,而非依赖经验。
  • 向承运人与装箱承包商交底。 申报义务在承运人、装箱单位或其代理人——外资食品出口商应在物流合同中明确任务归属与时限。

来源

  • 中华人民共和国海关总署 — 海关总署公告2026年第136号正式文本PDF(2026年9月8日): http://www.customs.gov.cn/customs/attachDir/2026/09/%E6%B5%B7%E5%85%B3%E6%80%BB%E7%BD%B2%E5%85%B3%E4%BA%8E%E8%A3%85%E8%BF%90%E5%87%BA%E5%8F%A3%E6%98%93%E8%85%90%E7%83%82%E5%8F%98%E8%B4%A8%E9%A3%9F%E5%93%81%E3%80%81%E5%86%B7%E5%86%BB%E5%93%81%E9%9B%86%E8%A3%85%E7%AE%B1%E9%80%82%E8%BD%BD%E6%A3%80%E9%AA%8C%E5%B7%A5%E4%BD%9C%E7%9A%84%E5%85%AC%E5%91%8A.pdf
  • 中华人民共和国海关总署 — 政务公开·海关总署公告栏目(含官方政策解读条目): http://gec.customs.gov.cn/customs/302249/index.html
  • 海关总署进出口食品安全局 — 适载检验商品编码公布页面(公告指定入口): http://jckspj.customs.gov.cn/spj/zcfg18/index.html

相关阅读

  • 见:外资食品生产企业出口注册与备案(food-export-registration)
  • 见:进口食品冷链物流合规(cold-chain-import-compliance)

China extends self-printed preferential origin certificates to Myanmar and Cambodia shipments from 16 September 2026

  • GACC Announcement No. 135 (2026), issued on 7 September 2026, extends self-printable preferential origin certificates from 16 September 2026 to shipments to Myanmar and Cambodia under the RCEP and the China–ASEAN FTA framework, and to Cambodia under the China–Cambodia FTA, moving a further tranche of certificate issuance fully online.
    海关总署公告2026年第135号(2026年9月7日发布)决定自2026年9月16日起,将《区域全面经济伙伴关系协定》(RCEP)和《中华人民共和国与东南亚国家联盟全面经济合作框架协议》项下输缅甸、柬埔寨,以及《中华人民共和国政府和柬埔寨王国政府自由贸易协定》项下输柬埔寨的原产地证书,增加为可自助打印证书,推动又一批证书签发全面线上化。
  • Self-printing lets exporters print approved preferential origin certificates on A4 paper at their own premises through the China International Trade Single Window or the customs government-service platform, eliminating a physical visit to a customs office to collect the stamped paper.
    自助打印是指出口企业通过中国国际贸易”单一窗口”或海关政务服务平台,在审核通过后自行使用彩色打印设备在A4纸上打印带有底纹、企业签章及签名、海关签章及签名的原产地证书,无需再到海关现场领取纸质证书。
  • The extension follows the consolidation of customs electronic-document rules: alongside electronic certificates, e-declarations and e-inspection documents now carry the same legal effect as paper versions, and all previous separate CIIE-related notices were repealed by Announcement No. 128 in the same week.
    此次扩围与海关电子单证规则整合同步推进:电子报关单证、原产地证书与检验检疫电子单证与纸质文件具有同等法律效力;同一周发布的第128号公告亦废止了此前历届进博会通关便利化文件。
  • For foreign-invested exporters and trading companies operating in China, the practical gain is speed and cost: certificate data is transmitted electronically to the importing customs, supporting paperless declaration and tariff preference claims for consignments to the two Southeast Asian markets.
    对在华经营的外资出口企业和贸易公司而言,实际收益在于速度与成本:证书电子数据直通进口方海关,支持对缅甸、柬埔寨两市场的无纸化申报与关税优惠申请。
  • Background momentum: electronic exchange of origin data with Malaysia began on 1 June 2026 under GACC Announcement No. 74, with full electronic-only processing from 1 December 2026 — Myanmar and Cambodia expansion follows the same digital-first trajectory.
    背景动能:根据海关总署公告2026年第74号,中国—马来西亚原产地电子信息交换系统已于2026年6月1日运行,2026年12月1日起全面实行电子联网模式——此次缅甸、柬埔寨扩围延续同一数字化优先路径。
  • Compliance note: the self-printing mechanics follow GACC Announcement No. 77 (2019) on the general rollout of self-printed origin certificates; enterprises should confirm they hold an approved seal-and-signature authorisation in the system before the new routes go live on 16 September.
    合规提示:自助打印的操作规则沿用海关总署2019年第77号公告(关于全面推广原产地证书自助打印的公告);企业应在9月16日新线路启用前,确认已在系统中完成印章、签名的授权备案。

China extends self-printed preferential origin certificates to Myanmar and Cambodia shipments from 16 September 2026 | 海关总署再扩自助打印”朋友圈”:输缅甸、柬埔寨优惠原产地证书9月16日起可自助打印

Overview

On 7 September 2026, the General Administration of Customs of China (GACC) issued Announcement No. 135 (2026), deciding that from 16 September 2026 the list of self-printable preferential origin certificates will be expanded. The newly included certificates cover shipments to Myanmar and Cambodia under the Regional Comprehensive Economic Partnership (RCEP) and under the framework agreement on comprehensive economic cooperation between China and ASEAN, plus shipments to Cambodia under the China–Cambodia Free Trade Agreement. Other matters continue to follow GACC Announcement No. 77 (2019) on the general rollout of self-printed origin certificates.

The announcement is short, but it sits inside a fast-moving digitisation of China’s origin-certificate administration. For foreign-invested exporters and trading houses that route goods to Southeast Asia from mainland production or procurement bases, the change removes a remaining paper step and aligns Myanmar- and Cambodia-bound consignments with the paperless channels already available for many other destinations.

What “self-printing” means in practice

Since GACC promoted self-printed origin certificates nationwide in 2019, an exporter whose certificate application has been approved by customs can print the certificate itself on plain A4 paper with a colour printer, instead of visiting a customs office to collect a stamped copy. The printed sheet carries the security background, the enterprise’s own seal and signature, and the customs seal and signature. The exporter first completes a one-off authorisation of its seal and authorised signatories in the system; once approved, printing is done from the applicant’s own terminal.

The practical consequences are well established: shorter lead times for certificate release, no travel to a customs counter, and full visibility of certificate status from the exporter’s own system. What changes on 16 September is simply the geographic coverage — certificates for the Myanmar and Cambodia corridors under the relevant preferential arrangements join the self-printable family.

Which certificates are added

Read carefully, the new coverage is threefold:

  1. certificates under RCEP for exports to Myanmar;
  2. certificates under the China–ASEAN comprehensive economic cooperation framework agreement for exports to Myanmar and Cambodia; and
  3. certificates under the China–Cambodia Free Trade Agreement for exports to Cambodia.

In other words, exporters claiming preferential tariff treatment on goods shipped from China to Myanmar or Cambodia under any of these three instruments can, from 16 September 2026, obtain the supporting origin certificate by self-printing rather than by visiting customs.

Why it matters for foreign-invested traders

For multinational groups that manufacture or trade out of China, tariff-preference documentation is a routine but high-stakes process. A certificate that is delayed or that carries a clerical error can hold a container at the border or forfeit a tariff margin that the commercial contract already priced in. Three features of this update matter:

  • Faster certificate issuance. Self-printing cuts the queue for counter collection and lets the exporter time the certificate to the shipment, which is valuable where buyers request certificates at short notice.
  • Lower administrative cost. Removing the need for a physical customs visit reduces the logistics of documentation for companies located away from a competent issuing office, and fits the operating pattern of trading companies that manage several origin regimes in parallel.
  • Cleaner e-record trail. Because self-printed certificates flow through the electronic system, the audit trail for AEO-style compliance reviews and for later verifications by importing customs is more straightforward.

The broader digitisation context

The 135th announcement is one of several recent moves that together redraw the paperwork map of China’s preferential trade:

  • Electronic exchange of origin data with Malaysia. Under GACC Announcement No. 74 (2026), the China–Malaysia electronic exchange system for origin information has operated since 1 June 2026, transmitting RCEP certificates, back-to-back certificates and China–ASEAN framework certificates in real time. During the transition to 30 November 2026, importers who receive a “no electronic data found” prompt may still key in the certificate information manually; from 1 December 2026, an importer wanting early release of goods without a matched e-record must apply for a duty guarantee instead.
  • Equal legal effect of electronic documents. With the September 2026 batch of trade facilitation rules, electronic customs declarations, origin certificates and inspection/quarantine e-documents carry the same legal force as their paper counterparts, which underpins paperless declaration at import.
  • Rolling consolidation of event-based notices. GACC Announcement No. 128 (2026) on the ninth China International Import Expo issued the 2026 customs clearance guide and facilitation measures and repealed eight earlier expo-related announcements, keeping the rulebook current in one place.

Seen together, these steps describe a single direction: origin certification in China is becoming an online, data-linked process in which the paper certificate is a print-out of an electronic record rather than a standalone document.

Practical steps

  • Confirm that your company’s seal and authorised-signatory details are registered and approved in the self-printing module of the China International Trade Single Window or the customs government-service platform before 16 September 2026.
  • Identify which of your current shipments to Myanmar and Cambodia claim preference under RCEP, the China–ASEAN framework agreement or the China–Cambodia FTA, and update your standard operating procedures so those certificate types are printed in-house from the effective date.
  • For imports into China from Malaysia, review whether your vendors’ certificates are reaching the electronic exchange system; where a shipment moves without matched electronic data after 1 December 2026, plan for the duty-guarantee route.
  • Keep a documented file of each self-printed certificate, including the electronic serial number, because importing customs in the destination market may verify origin through official channels.

Sources

  • 海关总署公告2026年第135号(关于增加输缅甸、柬埔寨自助打印优惠原产地证书的公告): http://www.customs.gov.cn/customs/2026-09/09/article_2026090911301668140.html
  • 长沙海关 — RCEP原产地应用场景式服务(自助打印、经核准出口商流程说明): http://changsha.customs.gov.cn/changsha_customs/ztzl/rcepycdzsqzcjsfw/index.html
  • 北京海关 — 原产地证书签发场景式服务(申请入口与流程): http://beijing.customs.gov.cn/ningbo_customs/470784/cjsfw53/ycdzmsqfcjsfw/index.html
  • 中国国际进口博览会官网 — 海关总署公告2026年第128号(进博会通关须知与便利措施): https://www.ciie.org/zbh/bqgffb/20260902/63841.html

Related reading

  • see also: RCEP origin certificate mutual recognition and electronic networking trends (rcep-certificate-mutual-recognition-2026)
  • see also: how foreign-invested companies use RCEP tariff concessions in 2026 (rcep-2026-tariff-concession-schedule)

海关总署再扩自助打印”朋友圈”:输缅甸、柬埔寨优惠原产地证书9月16日起可自助打印

概述

2026年9月7日,海关总署发布公告2026年第135号,决定自2026年9月16日起,扩大可自助打印的优惠原产地证书范围。新增范围包括:《区域全面经济伙伴关系协定》(RCEP)和《中华人民共和国与东南亚国家联盟全面经济合作框架协议》项下输往缅甸、柬埔寨,以及《中华人民共和国政府和柬埔寨王国政府自由贸易协定》项下输往柬埔寨的原产地证书。其他事项按海关总署2019年第77号公告(关于全面推广原产地证书自助打印的公告)执行。

公告本身很简短,但它处在海关原产地证书管理快速数字化的进程中。对于以中国大陆生产或采购基地向东南亚发货的外资出口企业与贸易公司而言,这一变化消除了最后一道线下领证环节,使输往缅甸、柬埔寨的货物与许多其他目的地已可用的无纸化通道对齐。

自助打印在实际操作中意味着什么

自2019年海关全面推广原产地证书自助打印以来,出口企业在证书申请经海关审核通过后,即可使用彩色打印设备在A4纸上自行打印证书,而无需再到海关现场领取盖章纸质证书。打印出的证书带有防伪底纹、企业签章及签名、海关签章及签名。企业需先在系统中完成印章与授权签字人的一次性备案;备案通过后,即可在自己终端打印。

实际效果早已被实践验证:缩短证书出证周期、免去柜台往返、企业系统内全程可视证书状态。9月16日发生变化的只是地域覆盖——相关优惠安排项下缅甸、柬埔寨通道的证书加入可自助打印行列。

新增了哪些证书

仔细解读,新覆盖分三层:

  1. RCEP项下输往缅甸的证书;
  2. 中国—东盟全面经济合作框架协议项下输往缅甸和柬埔寨的证书;
  3. 中柬自贸协定项下输往柬埔寨的证书。

换言之,凡按上述三项安排之一、从中国出口至缅甸或柬埔寨并主张优惠关税待遇的出口企业,自2026年9月16日起即可自助打印所凭原产地证书,无需再跑海关。

对在华外资贸易企业为何重要

对以中国为制造或贸易基地的跨国集团而言,关税优惠单证是常规但高风险的流程环节。证书延误或差错,可能让货柜滞留口岸,或使商业合同已计入价格的关税优惠落空。本次更新的三个要点:

  • 出证更快。 自助打印省去柜台排队,企业可把证书时间与船期精确对齐,对买方临时要证的场景尤其宝贵。
  • 行政成本更低。 免去现场领证的往返,对办公地点距签证机构较远、且并行管理多个原产地制度的企业更为友好。
  • 电子留痕更清晰。 自助打印证书全程走电子系统,便于AEO式合规复核及进口方海关后续核查留取审计轨迹。

更宏观的数字化背景

第135号公告是近期一系列举措之一,共同重塑中国优惠贸易单证版图:

  • 与马来西亚实现原产地数据电子交换。 依据海关总署公告2026年第74号,中马原产地电子信息交换系统自2026年6月1日起运行,实时传输RCEP证书、背对背证书与中国—东盟框架证书。2026年11月30日前的过渡期内,进口人遇”无法查找到原产地证明电子数据”提示的,仍可手动录入证书电子信息;自2026年12月1日起,进口人在无电子数据匹配的情况下要求提前放行货物的,应申请办理税款担保。
  • 电子单证具有同等法律效力。 随着2026年9月一批贸易便利化规则落地,电子报关单证、原产地证书与检验检疫电子单证与纸质文件具有同等法律效力,为进口无纸化申报奠定基础。
  • 展会类公告滚动整合。 海关总署公告2026年第128号就第九届进博会发布2026年通关须知与便利措施,同时废止此前八份进博会相关公告,使规则体系统一更新。

综合来看,这些步骤指向同一方向:中国的原产地签证正走向在线化、数据互联,纸质证书成为电子记录的打印件,而不再是独立单证。

实务建议

  • 在2026年9月16日前,确认公司印章与授权签字人信息已在中国国际贸易”单一窗口”或海关政务服务平台的印章签名授权模块完成备案。
  • 梳理当前输往缅甸、柬埔寨的哪些货批分别按RCEP、中国—东盟框架协定或中柬自贸协定主张优惠,并更新作业规程,使相关证书类型自生效日起改为自助打印。
  • 从马来西亚进口的,核查境外供应商证书是否已进入电子交换系统;2026年12月1日之后如货物无电子数据匹配,应预判税款担保路径。
  • 妥善留存每份自助打印证书档案,包括电子编号,因目的地国进口海关可能通过官方渠道开展原产地核查。

来源

  • 海关总署公告2026年第135号(关于增加输缅甸、柬埔寨自助打印优惠原产地证书的公告): http://www.customs.gov.cn/customs/2026-09/09/article_2026090911301668140.html
  • 长沙海关 — RCEP原产地应用场景式服务(自助打印、经核准出口商流程说明): http://changsha.customs.gov.cn/changsha_customs/ztzl/rcepycdzsqzcjsfw/index.html
  • 北京海关 — 原产地证书签发场景式服务(申请入口与流程): http://beijing.customs.gov.cn/ningbo_customs/470784/cjsfw53/ycdzmsqfcjsfw/index.html
  • 中国国际进口博览会官网 — 海关总署公告2026年第128号(进博会通关须知与便利措施): https://www.ciie.org/zbh/bqgffb/20260902/63841.html

相关阅读

  • 见:RCEP原产地证书互认与电子联网趋势(rcep-certificate-mutual-recognition-2026)
  • 见:2026年外资企业如何运用RCEP关税减让(rcep-2026-tariff-concession-schedule)

Ninth CIIE customs guide released: GACC Announcement 2026 No. 128

  • GACC Announcement 2026 No. 128, published on 1 September 2026, releases the Customs Clearance Guide for the Ninth China International Import Expo (CIIE) and the customs facilitation measures supporting the expo, which runs in Shanghai from 5 to 10 November 2026.
    海关总署2026年9月1日发布第128号公告,公布《2026年第九届中国国际进口博览会海关通关须知》和《海关支持2026年第九届中国国际进口博览会便利措施》;第九届进博会将于2026年11月5日至10日在上海举办。
  • Nine earlier customs announcements covering the previous eight editions of the expo are repealed in one stroke (2018 Nos. 55 and 76, 2019 No. 115, 2020 No. 84, 2021 No. 54, 2022 No. 62, 2023 No. 93, 2024 No. 78 and 2025 No. 148), consolidating the regime into a single current text.
    公告同时废止此前适用于前八届进博会的9份海关公告(2018年第55、76号,2019年第115号,2020年第84号,2021年第54号,2022年第62号,2023年第93号,2024年第78号,2025年第148号),将规则整合为一份现行文本。
  • The facilitation measures cover the full chain — inbound declaration, inspection and supervision, and post-expo disposal — and focus on tax treatment for exhibits, security-deposit models and inspection and quarantine convenience for overseas exhibitors.
    便利措施覆盖全链条——展品入境申报、查验监管与展后处置——并聚焦展品税收待遇、担保模式以及面向境外参展企业的检验检疫便利。
  • The guide is drafted on the experience of the previous eight expos, standardising procedures that overseas exhibitors, logistics agents and customs brokers must follow to move goods into the National Exhibition and Convention Center (Shanghai) and back out afterwards.
    通关须知在前八届办展经验基础上起草,将境外参展商、物流代理与报关行把货物运入国家会展中心(上海)及展后复运出境的程序统一规范化。
  • For companies exhibiting at CIIE 2026, the practical task is to align forwarders and brokers with the current guide, confirm which temporary-import and tax arrangements apply to their exhibit categories, and file in the timeframes the announcement sets.
    对计划参展第九届进博会的企业而言,实操要点是让货代与报关行对齐现行须知,确认展品类别适用的临时进出口与税收安排,并按公告设定的时限完成申报。
  • The announcement is effective from 1 September 2026, giving exhibitors roughly two months to prepare before the expo opens.
    公告自2026年9月1日起施行,为参展企业留出约两个月的准备期。

Ninth CIIE customs guide released: GACC Announcement 2026 No. 128 | 第九届进博会海关通关须知发布:海关总署2026年第128号公告解读

Overview

On 1 September 2026 the General Administration of Customs (GACC) published Announcement 2026 No. 128 — on releasing the Customs Clearance Guide for the 2026 Ninth China International Import Expo and the customs facilitation measures supporting the expo (关于发布《2026年第九届中国国际进口博览会海关通关须知》和《海关支持2026年第九届中国国际进口博览会便利措施》的公告). The ninth CIIE will be held at the National Exhibition and Convention Center (Shanghai) from 5 to 10 November 2026.

The announcement does two things at once. First, it sets out, in two attachments, the operational guide that exhibitors and their agents must follow when moving exhibition goods into and out of the expo. Second, it repeals nine earlier announcements that had governed each of the previous eight editions — 2018 Nos. 55 and 76, 2019 No. 115, 2020 No. 84, 2021 No. 54, 2022 No. 62, 2023 No. 93, 2024 No. 78 and 2025 No. 148 — consolidating the customs regime for the CIIE into one current text that applies from 1 September 2026.

What the guide covers

The Customs Clearance Guide and the facilitation measures were drafted after reviewing the experience of the first eight expos. Together they establish operating norms across the whole lifecycle of exhibition goods:

  • Inbound declaration. The procedures for declaring exhibition goods entering China for the expo, including the documentation, licensing and permit requirements that apply to different categories of exhibits.
  • Inspection and supervision. How customs inspects and supervises the goods while they are on site, including the treatment of goods that require inspection and quarantine clearance, and the arrangements for moving goods into the venue.
  • Post-expo disposal. The rules for what happens after the expo closes: re-export of exhibits, domestic sale or donation of goods where permitted, destruction where required, and the associated duty treatment.

The package also addresses the tax treatment of exhibits, the security-deposit (担保) models available to exhibitors and their agents, and inspection and quarantine convenience designed around the practical pain points that overseas exhibitors have reported in previous years.

Why consolidation matters

For the first eight expos, customs rules were issued edition by edition, so an exhibitor returning year after year faced a stack of overlapping announcements. Announcement 2026 No. 128 collapses that history into a single document. The practical benefits are:

  • one current text to share with freight forwarders and customs brokers, rather than a chain of historical references;
  • consistent classification and declaration treatment across participating companies, reducing the risk that different agents apply different versions of the rules; and
  • a clean baseline for the 2026 expo specifically, which matters because each expo edition has its own timing, catalogue and operational arrangements.

Tax and facilitation highlights

Drawing on prior editions, the facilitation package is built around lowering the institutional cost of exhibiting:

  • Tax treatment for exhibits. Goods brought in for exhibition remain subject to the temporary import and duty arrangements that apply to the CIIE, with the specific treatment depending on the exhibit category and what happens to the goods afterwards (re-export, sale or donation).
  • Security-deposit models. Flexible guarantee arrangements are intended to reduce the cash-flow burden on exhibitors while customs exposure is properly covered.
  • Inspection and quarantine convenience. Streamlined procedures for exhibits needing inspection and quarantine are designed to get goods into the venue faster and to avoid delays at the border.
  • Regulatory modernisation. The measures reflect the operational experience built up over eight editions, including the shift toward pre-declaration and coordinated processing that has progressively shortened clearance times for expo goods.

What exhibitors should do before November

For overseas companies planning to exhibit at the ninth CIIE — or to send goods to the expo through a local agent — the practical checklist is:

  • Obtain the current text. Ask the customs broker or freight forwarder for GACC Announcement 2026 No. 128 and its two attachments so that everyone works from the same 2026 document.
  • Classify exhibits early. Confirm the customs classification of each exhibit item and check the licensing or permit requirements that apply, especially for goods that are regulated or subject to inspection and quarantine.
  • Choose the guarantee route. Discuss the security-deposit options with the agent and decide which model fits your shipment profile before goods leave the origin country.
  • Plan the disposal outcome. Decide in advance whether exhibits will be re-exported, sold or donated after the expo, because the duty treatment and procedures differ by outcome.
  • Align the timeline. The announcement is effective from 1 September 2026; book the logistics chain so that declaration files can be prepared and submitted within the timeframes the guide sets.

Sources

  • 中华人民共和国海关总署 — 海关总署公告2026年第128号(关于发布《2026年第九届中国国际进口博览会海关通关须知》和《海关支持2026年第九届中国国际进口博览会便利措施》的公告): http://www.customs.gov.cn/customs/2026-09/02/article_2026090214402114818.html
  • 中华人民共和国海关总署 — 政务公告(2026年第122–129号列表): http://www.customs.gov.cn/
  • 凤凰网财经/腾讯新闻 — 海关总署发布第九届进博会通关便利措施,前八届相关公告废止: https://news.qq.com/rain/a/20260902A0DEJE00

Related reading

  • see also: Declaring psychotropic drug imports and exports — NMPA-GACC Announcement 2026 No. 84 (368-psychotropic-drug-import-export)
  • see also: “One form, two declarations”: the mainland–Hong Kong road manifest reform (334-mainland-hk-road-manifest)

第九届进博会海关通关须知发布:海关总署2026年第128号公告解读

概述

2026年9月1日,海关总署发布2026年第128号公告——《关于发布〈2026年第九届中国国际进口博览会海关通关须知〉和〈海关支持2026年第九届中国国际进口博览会便利措施〉的公告》。第九届中国国际进口博览会将于2026年11月5日至10日在国家会展中心(上海)举办。

本公告同时做两件事。其一,以两份附件形式发布操作性指南,规范参展企业及其代理将展品运入、运出进博会的流程。其二,一次性废止此前适用于前八届进博会的9份公告——2018年第55、76号,2019年第115号,2020年第84号,2021年第54号,2022年第62号,2023年第93号,2024年第78号,2025年第148号——把进博会海关制度整合为一份自2026年9月1日起施行的现行文本。

通关须知涵盖什么

通关须知与便利措施在总结前八届办展经验的基础上起草,共同确立展品全生命周期的操作规范:

  • 入境申报。 展品进境参展的申报程序,包括不同类别展品适用的单证、许可证与准许要求。
  • 查验与监管。 展品在场期间的查验监管安排,包括需检验检疫放行的货物处理方式,以及货物进入展馆的调配。
  • 展后处置。 展会结束后的处置规则:展品复运出境、依规内销或捐赠、须销毁的情形,以及相应税收处理。

整套文件还回应展品税收待遇、参展企业及其代理可用的担保模式,以及围绕境外参展企业往年反映的实际痛点设计的检验检疫便利。

为何整合如此重要

前八届进博会的海关规则逐届发布,常年返场参展的企业面对的是层层叠叠的历史公告。2026年第128号公告将这段历史压缩为一份文件。实际好处在于:

  • 与货代和报关行共享一份现行文本,而非一长串历史引注;
  • 参展企业的归类与申报处理口径一致,降低不同代理适用不同版本规则的风险;
  • 为2026年当届提供干净的基准——因为每届进博会在时间、目录与运营安排上各有不同。

税收与便利要点

汲取历届经验,便利化方案围绕降低参展制度性成本展开:

  • 展品税收待遇。 参展进境货物继续适用进博会相应的临时进出口与税收安排,具体待遇取决于展品类别及展后去向(复运出境、内销或捐赠)。
  • 担保模式。 灵活的担保安排意在减轻参展企业资金占用,同时妥善覆盖海关风险敞口。
  • 检验检疫便利。 需检验检疫展品的流程被简化,使货物更快进入展馆,避免口岸滞留。
  • 监管现代化。 措施反映八届办展积累的运营经验,包括以预申报与协同办理缩短展品通关时间的趋势。

参展企业11月前应做什么

对计划参展第九届进博会、或通过本地代理向进博会发运货物的境外企业,实用清单如下:

  • 取得现行文本。 请报关行或货代提供2026年第128号公告及两份附件,确保各方以同一份2026年文件为准。
  • 尽早归类展品。 确认每项展品的海关归类,核对适用的许可证与准许要求——尤其对受管制或须检验检疫的货物。
  • 选定担保路径。 与代理讨论担保选项,在货物离境前确定适合本批货型的模式。
  • 规划展后去向。 提前决定展品展后是复运出境、内销还是捐赠,因为税收待遇与程序因去向而异。
  • 对齐时间表。 公告自2026年9月1日生效;提前排布物流链条,确保申报文件能在须知设定的时限内准备并提交。

来源

  • 中华人民共和国海关总署 — 海关总署公告2026年第128号(关于发布《2026年第九届中国国际进口博览会海关通关须知》和《海关支持2026年第九届中国国际进口博览会便利措施》的公告): http://www.customs.gov.cn/customs/2026-09/02/article_2026090214402114818.html
  • 中华人民共和国海关总署 — 政务公告(2026年第122–129号列表): http://www.customs.gov.cn/
  • 凤凰网财经/腾讯新闻 — 海关总署发布第九届进博会通关便利措施,前八届相关公告废止: https://news.qq.com/rain/a/20260902A0DEJE00

相关阅读

  • 见:药用类精神药品进出口申报新规——国家药监局 海关总署2026年第84号公告(368-psychotropic-drug-import-export)
  • 见:”一单两报”:内地与香港公路舱单申报改革(334-mainland-hk-road-manifest)

Aviation bonded maintenance gets a national push: nine-department opinion, 13 measures

  • Nine central departments — led by the Ministry of Commerce — issued the Opinions on Promoting the High-Quality Development of Aviation Bonded Maintenance on 27 August 2026, setting out 13 measures across six areas and removing the regional restriction on bonded aircraft-repair operations.
    2026年8月27日,商务部等九部门发布《关于促进航空保税维修高质量发展的意见》,围绕六个方面提出13项措施,取消航空保税维修业务的区域范围限制。
  • The aviation bonded-maintenance product catalogue is expanded, and qualified repairers are defined as independent legal persons holding a CAAC maintenance licence, or enterprises authorised by civil-aviation authorities to accept repairs on their behalf.
    航空保税维修产品目录进一步扩大;开展维修的企业被界定为持有中国民用航空维修许可证的独立法人,或经民航主管部门批准、接受上述企业委托开展维修的企业。
  • New tax incentives: bonded maintenance may apply export VAT refund (exemption) treatment, and products that stay in China instead of being re-exported may be sold domestically after airworthiness certification under the stated duty rules.
    财税激励明确:保税维修业务可按规定适用出口退(免)税政策;维修后产品不复运出境转为内销的,在获得相关适航证明后可依规办理内销手续并按规定计税。
  • Supervision is streamlined: partial processes may be outsourced to qualified firms, replaced airworthy components may circulate domestically after duty payment or be kept as spares under bonded management, and one import permit covers the return-and-lease cycle for domestic jobs.
    监管更加便利:部分工序可外发至具备资质的企业;替换下具备再利用价值的航材经检测维修并获适航证明后,可完税在国内流通或转为备用件纳入保税管理;承接国内业务的维修产品返区再次租赁仅需一次进口许可。
  • The rule links into bonded-logistics hubs: new aviation repair enterprises are encouraged to locate in comprehensive bonded zones, where local management committees co-evaluate projects together with customs, commerce, ecology and civil-aviation authorities.
    新规与保税物流枢纽深度衔接:鼓励新增航空维修企业优先向综合保税区布局,区内项目由管委会会同商务、生态环境、海关、民航等部门评估支持。
  • For foreign MRO providers and parts suppliers the opinion widens the addressable China market — domestic sale of repaired goods, movement of used airworthy parts, and lower cross-border logistics friction all become easier under bonded arrangements.
    对外资维修商与航材供应商而言,意见拓宽了可参与的中国市场:修理后货物内销、可用旧件流转以及保税安排下的跨境物流摩擦下降,均变得更加便利。

Aviation bonded maintenance gets a national push: nine-department opinion, 13 measures | 航空保税维修迎来国家级政策礼包:九部门意见13项举措解读

Overview

On 27 August 2026 the Ministry of Commerce (MOFCOM) released the Opinions on Promoting the High-Quality Development of Aviation Bonded Maintenance (商务部等9部门关于促进航空保税维修高质量发展的意见), jointly issued by MOFCOM, the National Development and Reform Commission, the Ministry of Industry and Information Technology, the Ministry of Finance, the Ministry of Human Resources and Social Security, the Ministry of Ecology and Environment, the General Administration of Customs (GACC), the State Taxation Administration and the Civil Aviation Administration of China (CAAC). Dated 19 August 2026, the document contains 13 measures in six areas and asks every relevant department and locality to treat aviation bonded maintenance as an important opening-up policy to be advanced quickly.

Aviation maintenance is technology- and value-intensive and tightly regulated. The rationale stated in the document is straightforward: promoting bonded aircraft repair strengthens international exchange and cooperation in civil-aircraft maintenance, lifts the level of the domestic MRO (maintenance, repair and overhaul) industry, and underpins safe and stable civil-aviation operations.

Background: an industry worth USD 60 billion

MOFCOM spokesperson Huang Ling told the regular press briefing that China’s civil-aviation fleet is now the second-largest in the world, and demand for maintenance of aircraft and components is rising fast. The supporting data are striking: of the country’s 37 aviation bonded-maintenance projects, the sector accounts for 12% of bonded-maintenance project numbers yet 85% of the import-export value, reaching USD 60 billion in 2025. Bonded maintenance has therefore become a disproportionate contributor to trade value, and the policy is designed to push it further.

What the 13 measures do

1. Stronger support for aviation bonded maintenance

  • Wider product scope. The aviation bonded-maintenance product catalogue is expanded.
  • No regional restriction. Enterprises may conduct catalogue business both inside and outside comprehensive bonded zones — the previous geographic limitation is removed.
  • Encouraged location. New aviation repair enterprises are encouraged to set up in comprehensive bonded zones.
  • Who may operate. The definition of an eligible repairer is pinned down: an independent legal person holding a CAAC civil-aircraft maintenance licence, or an enterprise approved by civil-aviation authorities to carry out maintenance on behalf of such licence holders.

2. Fiscal, tax and financial support

  • Domestic sale after repair. Where a repaired product is not re-exported but sold domestically, after obtaining the relevant airworthiness certification it may be sold under national rules. For repairs inside a comprehensive bonded zone, duty is levied on the goods in their actual inspected state after repair (import duty, import VAT and consumption tax); for repairs under bonded maintenance outside the zone, the importer tops up import duty, import VAT and consumption tax on the bonded goods’ first-line import state, and domestic-link VAT and consumption tax are levied in the normal way.
  • Export refund (exemption). Bonded maintenance and outward processing repair services may apply export VAT refund (exemption) treatment in accordance with the rules.
  • Financial linkage. Fiscal and insurance-based financial policies are coordinated to improve export-credit-insurance appetite and service quality for aviation bonded maintenance.

3. More convenient supervision

  • Outsourced processes. A bonded repair enterprise may send part of its process to enterprises with the appropriate qualifications; the repaired products and the old or defective parts must all be returned to the original commissioning enterprise.
  • Replaced parts can circulate. Airworthy materials replaced during maintenance that retain reuse value may — after testing, repair and airworthiness certification — circulate domestically after duty payment, or be converted into spare parts under bonded management, instead of being re-exported or destroyed.
  • One permit for the lease cycle. Where a repair enterprise in a customs special supervision zone takes on domestic aviation bonded-maintenance work and the repaired product returns outside the zone for further leasing, only one import licence is needed after airworthiness certification.

4. Greener development

Enterprises are encouraged to increase the share of low- (zero-) VOC products in aviation bonded maintenance and, for technically mature processes, to use low- (zero-) VOC raw and auxiliary materials throughout.

5. Talent support

Localities are encouraged to include aviation-maintenance occupations in vocational-skills training guidance catalogues. Aviation-maintenance training institutions inside comprehensive bonded zones may carry out bonded training business. Old and defective parts replaced during bonded maintenance may be used to make training aids and equipment without being classified as solid waste. Foreign personnel coming to China for aviation-maintenance training exchanges may apply for appropriately extended stay or residence periods.

6. Full-chain dynamic management

  • Project evaluation. Bonded-maintenance projects inside comprehensive bonded zones are evaluated and supported by the zone’s management committee (or the administrative body stationed by the local government) together with local commerce, ecology-and-environment, customs and civil-aviation authorities. Projects in free-trade zones and other areas are evaluated by the provincial (including separately listed city) commerce authority together with the same counterparts, which bears the primary regulatory responsibility. Other requirements follow the current bonded-maintenance management rules.
  • Traceability. Enterprises must have an information-management system (ERP) networked with customs and other departments, enabling full traceability of material consumption in their operations.
  • Domestic sale discipline. Goods qualified for domestic sale during bonded maintenance may be sold inland after licence verification and compliance with supervision requirements — except goods whose import is prohibited by the state and restricted goods not permitted for import.
  • Solid waste. Solid waste generated during bonded maintenance is managed under domestic solid-waste rules.
  • CAAC oversight. Civil-aviation authorities at each level dynamically manage repair enterprises and support the evaluation work; repair enterprises must inform commissioning parties of their approved repair-product scope and must not operate beyond it.

What it means for foreign companies

Aviation bonded maintenance sits at the intersection of China’s MRO market and its bonded-logistics infrastructure. The main takeaways for foreign participants:

  • A bigger, clearer addressable market. The expanded catalogue and the removal of the regional restriction mean a foreign MRO operator’s China joint venture or subsidiary can service aircraft on a nationwide basis under bonded arrangements, not just inside a specific zone.
  • Revenue beyond pure export. Previously, bonded repair was largely a “repair and re-export” model. The domestic-sale pathway after airworthiness certification, and the circulation of replaced airworthy parts after duty payment, open domestic demand for repaired goods and used parts — historically an area where the rules were ambiguous.
  • Lower logistics friction. Process outsourcing and the single-import-permit lease cycle reduce the cost of moving work and goods across borders, which matters for foreign enterprises with captive repair lines or parts-exchange programmes.
  • Comprehensive bonded zones remain the anchor. New entrants are steered toward comprehensive bonded zones, where the land, VAT and customs infrastructure already exists. A foreign MRO firm assessing where in China to base its repair line should weigh zone incentives, labour availability and the new ERP traceability requirement together.
  • Compliance expectations are higher. Full-process traceability (ERP networked with customs), solid-waste handling under domestic rules, and strict scope discipline mean foreign investors should build compliance into the business case from day one.

Practical steps

  • Review whether your product lines fall within the expanded aviation bonded-maintenance catalogue and which zone or free-trade-area location best fits the business model (zone-inside vs. zone-outside duty treatment differs).
  • Map the ERP and traceability upgrades needed to meet the customs-networked information-system requirement before applying for or renewing project status.
  • Model the economics of the new domestic-sale and used-airworthy-parts pathways: duty treatment differs depending on whether the repair occurs inside or outside a comprehensive bonded zone.
  • Check CAAC licence scope and the approved repair-product list, and update commercial contracts so commissioning parties are clearly informed of the approved scope.
  • For talent planning, factor in bonded training inside zones and the extended stay/residence possibilities for training-exchange personnel.

Sources

  • 商务部 — 商务部等9部门关于促进航空保税维修高质量发展的意见(全文): https://www.mofcom.gov.cn/zcfb/dwmygl/art/2026/art_b91279d04501446abbb89edbc2a67cbe.html
  • 中国(河北)自由贸易试验区 — 事关航空保税维修,商务部等九部门发布13项促进措施: http://ftz.hebei.gov.cn/src/page/newsDetail.html?id=9018b52a0c6a49d68480127cf03b9d9c
  • 经济参考网 — 九部门加大支持力度 航空保税维修迎政策礼包: http://jjckb.xinhuanet.com/20260828/722e7b0c354b4cb495cc2109897e1ffd/c.html

Related reading

  • see also: Comprehensive bonded zone reforms extended to Type B bonded logistics centres (328-comprehensive-bonded-zone-type-b)
  • see also: RCEP origin benefits in practice — 2026 customs clarifications (316-rcep-origin-clarifications)

航空保税维修迎来国家级政策礼包:九部门意见13项举措解读

概述

2026年8月27日,商务部官网发布《关于促进航空保税维修高质量发展的意见》(商务部等9部门)。文件由商务部、国家发展改革委、工业和信息化部、财政部、人力资源社会保障部、生态环境部、海关总署、税务总局、中国民航局九部门联合印发(落款日期2026年8月19日),围绕六个方面提出13项措施,并要求各相关部门和单位将航空保税维修作为一项重要开放政策加快推动。

航空维修技术含量和附加值高,对企业和产品管理严格。文件给出的理由直白:促进航空保税维修高质量发展,有利于加强航空维修国际交流与合作,提升民航维修产业发展水平,保障民航运输安全稳定运行。

背景:一个600亿美元规模的行业

商务部新闻发言人黄玲在例行发布会上介绍,中国民航运输业快速发展,机队规模居全球第二位,飞机及零部件维护修理需求日益增长。配套数据颇具说服力:全国37个航空保税维修项目,以保税维修行业12%的项目数贡献了85%的进出口货值,2025年达到600亿美元。保税维修由此成为进出口货值中不成比例的重要贡献者,政策意在进一步推动其发展。

13项举措做了什么

一、加大航空保税维修支持力度

  • 扩大产品范围。 航空保税维修产品目录范围进一步扩大。
  • 取消区域限制。 综合保税区内、外均可开展航空保税维修业务——此前的区域范围限制被取消。
  • 引导布局。 鼓励新增航空维修企业优先向综合保税区布局。
  • 界定企业范围。 明确开展维修的企业为持有中国民用航空维修许可证的独立法人,或经民航主管部门批准、接受该类企业委托开展航空维修业务的企业。

二、加强财税、金融政策支持

  • 修后产品可内销。 航空保税维修后的产品不复运出境转为内销的,在获得相关适航证明后可按国家有关规定办理内销手续。综合保税区内维修后产品内销,以修理后货物的实际报验状态照章征收进口关税、进口环节增值税和消费税;综合保税区外保税维修后产品内销,按保税货物一线进口状态补缴进口关税、进口环节增值税和消费税,并照章征收国内环节增值税、消费税。
  • 适用出口退(免)税。 保税维修等对外修理修配服务,可按规定适用出口退(免)税政策。
  • 财政金融联动。 加强财政与保险等金融政策联动,提升出口信保对航空保税维修业务的承保积极性和服务质效。

三、提升监管便利化水平

  • 工序可外发。 航空保税维修企业可将部分工序外发至具有相应资质条件的企业,维修后产品及旧件、坏件等须全部复运至原委托企业。
  • 换下航材可流通。 航空保税维修替换下的具备再利用价值的航材,经检测维修并获得相关适航证明后,无需复运出境或销毁处置,可完税后在国内流通,或转为备用件纳入保税管理。
  • 修后租赁一次许可。 海关特殊监管区域内航空维修企业承接来自国内的航空保税维修业务,维修后的产品返回境内区外再次开展租赁服务的,在获得相关适航证明后,只办理一次进口许可。

四、支持绿色化发展

鼓励在航空保税维修业务中提高低(无)挥发性有机物(VOCs)含量产品的使用比重,支持企业对技术成熟环节全部使用低(无)VOCs含量原辅材料,提升环境保护水平。

五、增强人才保障能力

鼓励地方将航空维修相关职业纳入职业技能培训需求指导目录。支持综合保税区内航空维修培训机构开展保税培训业务。航空保税维修替换下的旧件、坏件等用于制作航空维修培训教具、设备的,不认定为固体废物。支持来华航空维修培训交流人员申请适当延长停居留期限。

六、加强全链条动态管理

  • 项目管理评估。 综合保税区内项目由综保区管委会(或地方政府派驻行政管理机构)会同当地商务、生态环境、海关、民航等部门评估支持;自贸试验区等其他区域项目由省级(含计划单列市)商务主管部门会同生态环境、海关、民航等部门评估支持并承担监管主体责任。其他要求参照现行保税维修管理规定执行。
  • 全流程可追溯。 开展航空保税维修的企业,须具备与海关等部门联网的信息化管理系统(ERP),实现业务耗用等信息的全流程可追溯。
  • 内销合规。 航空保税维修过程中具备内销条件的货物,经验核许可证件并符合相关监管要求的允许内销;属于国家禁止进口的和未经准许限制进口的货物不得内销。
  • 固废管理。 维修产生的固体废物按国内固体废物相关规定管理。
  • 民航动态监管。 各级民航管理机构对航空维修企业实施动态管理,配合做好评估工作;航空保税维修企业应向业务委托方告知其获批准的维修产品范围,严禁超范围开展业务。

对外国企业的意义

航空保税维修正处于中国MRO市场与保税物流基础设施的交汇点。外国参与者的主要看点:

  • 市场更大、规则更清晰。 目录扩大与区域限制取消,意味着外资维修商的中国合资公司或子公司可在全国范围以保税方式提供维修服务,而不只限于某一特定区域。
  • 收入来源不止出口。 过去保税维修基本是”修理再出境”模式。如今获得适航证明后的内销路径、以及完税后可用旧件的流通路径,打开了修理后货物与可用旧件的内需市场——这一领域过去规则模糊。
  • 跨境物流摩擦下降。 工序外发与租赁周期一次进口许可,降低了工件与货物跨境流动的成本,对拥有自有维修线或部件交换计划的外资企业尤其重要。
  • 综合保税区仍是锚点。 新增企业被引导至综合保税区,那里已具备土地、增值税与海关监管基础设施。外资MRO企业评估维修线设址时,应统筹区内激励、劳动力可得性与新的ERP追溯要求。
  • 合规要求更高。 全流程可追溯(ERP与海关联网)、固废按国内规则管理、业务范围严格纪律,都意味着外资投资者应从立项之初就把合规纳入商业方案。

实务建议

  • 判断自身产品线是否落入扩围后的航空保税维修产品目录,以及综保区内、区外哪种布局更契合业务模式(两者内销计税方式不同)。
  • 对照海关联网的信息化系统要求,在申请或续展项目资质前规划ERP与追溯能力升级。
  • 测算新内销路径与可用旧件路径的经济性:计税方式取决于维修发生在综保区内还是区外。
  • 核对中国民航维修许可证范围与获批维修产品清单,更新商业合同,使委托方清晰知晓获批范围。
  • 人才规划上,可考虑综保区内保税培训以及培训交流人员的停居留延长可能。

来源

  • 商务部 — 商务部等9部门关于促进航空保税维修高质量发展的意见(全文): https://www.mofcom.gov.cn/zcfb/dwmygl/art/2026/art_b91279d04501446abbb89edbc2a67cbe.html
  • 中国(河北)自由贸易试验区 — 事关航空保税维修,商务部等九部门发布13项促进措施: http://ftz.hebei.gov.cn/src/page/newsDetail.html?id=9018b52a0c6a49d68480127cf03b9d9c
  • 经济参考网 — 九部门加大支持力度 航空保税维修迎政策礼包: http://jjckb.xinhuanet.com/20260828/722e7b0c354b4cb495cc2109897e1ffd/c.html

相关阅读

  • 见:综合保税区改革向B型保税物流中心推广(328-comprehensive-bonded-zone-type-b)
  • 见:RCEP原产地优惠实操——2026年海关政策澄清(316-rcep-origin-clarifications)

RCEP in Practice 2026: Certificate Mutual Recognition and Smarter Origin Compliance

  • A nationwide first: from August 2026, the CCPIT (trade-promotion councils) and customs authorities in Inner Mongolia, Shandong, Shanxi and Ningxia mutually recognise each other’s origin-certificate inspection results, cutting certificate issuance time by one to three days.
    全国首创:自 2026 年 8 月起,内蒙古、山东、山西、宁夏四省区贸促会与海关实施原产地证书管理信息互认新模式,实现出口原产地核查结果”一次核查、结果互认”,证书签发时间压缩 1 至 3 天。
  • Under the mutual-recognition model, companies no longer face duplicate on-site inspections when applying for preferential origin certificates from both the CCPIT and customs within a year for the same product.
    互认模式下,企业一年内分别向贸促会和海关申办同一产品优惠原产地证书时,不再遭遇重复实地核查。
  • RCEP preferential origin certificates remain the “paper gold” for tariff savings: in the first seven months of 2026, the four provinces’ customs and CCPIT systems issued 693,000 preferential certificates covering export value of RMB 220.1 billion, up 19.8% and 15.9% year on year.
    RCEP 等优惠原产地证书仍是关税减免的”纸黄金”:2026 年 1—7 月,四省区海关和贸促会签发优惠原产地证书 69.3 万份,出口享惠货值 2201 亿元,同比分别增长 19.8% 和 15.9%。
  • Customs across China continue to digitise the certificate pipeline — “paperless filing, intelligent review, self-service printing” — with self-print rates around 99% in some districts, making RCEP preference claims a same-day operation for compliant exporters.
    全国海关持续推进原产地证书数字化——”无纸化申报 + 智能审核 + 自助打印”,部分地区自助打印率达 99% 以上,使合规出口商的 RCEP 享惠申报成为当日办结事项。
  • For foreign-invested exporters and importers, the practical agenda is to embed RCEP origin rules into product design, keep three-year records of origin evidence, and use the mutual-recognition and self-print channels to compress clearance time and tariff costs.
    对外资进出口企业,实操议程是把 RCEP 原产地规则嵌入产品设计、留存三年的原产地证据记录,并利用互认与自助打印通道压缩通关时间与关税成本。

RCEP in Practice 2026: Certificate Mutual Recognition and Smarter Origin Compliance | 2026 年 RCEP 实务:证书互认与更智能的原产地合规

Overview

The Regional Comprehensive Economic Partnership (RCEP) entered its fifth year of implementation in 2026, and the compliance machinery around it is getting faster. The defining August 2026 development is a nationwide first: the China Council for the Promotion of International Trade (CCPIT) systems and customs authorities in Inner Mongolia, Shandong, Shanxi and Ningxia began mutually recognising origin-certificate inspection results. Under the new model, a company that has already been inspected on-site by one issuing body for a given product within a year does not need to be re-inspected by the other; the certificate can be issued on the basis of the shared inspection record. Certificate issuance time is compressed by one to three days.

Reported by CCTV on 22 August 2026 and confirmed by the Inner Mongolia CCPIT, the mutual-recognition model attacks a real pain point. Previously, a company applying for preferential origin certificates from both the CCPIT and customs in the same year would face two full on-site inspections of its raw-material sourcing and production processes. For exporters serving multiple free-trade agreement markets — RCEP plus China-ASEAN, China-Korea, and two dozen other arrangements — the duplication was a genuine cost. Now, the first inspection’s conclusions are shared across provinces and departments through the mutual-recognition platform.

Why origin certificates matter for RCEP users

RCEP preferential origin certificates (and origin declarations) are the ticket to reduced or zero tariffs across the bloc’s 15 members. The rules are precise: the product must meet the RCEP origin criteria — wholly obtained (WO), produced exclusively from originating materials (PE), or meeting the product-specific rules such as the regional value content (RVC) or change-in-tariff-classification (CTC) tests — and the certificate or declaration must be obtained before export, with back-issuance allowed within 12 months of shipment.

The 2026 data shows the economic weight of these certificates. In the first seven months of 2026, the customs and CCPIT systems of Inner Mongolia, Shandong, Shanxi and Ningxia issued 693,000 preferential origin certificates covering export value of RMB 220.1 billion, up 19.8% and 15.9% year on year respectively; within the four provinces’ CCPIT systems alone, RCEP certificates grew 165.4% year on year in the first half. The Inner Mongolia example is instructive: businesses in the region enjoy tariff concessions under 23 free-trade agreements covering 34 countries and regions, and preferential certificates grew 23.3% year on year in the first half of 2026.

Digitisation: from days to seconds

Parallel to mutual recognition, customs districts are digitising the entire certificate lifecycle. The model of “paperless filing, intelligent review and self-service printing” is now standard: exporters submit applications through the China International Trade Single Window, intelligent systems review the data against the declared origin basis, and certificates can be printed at the applicant’s own terminal. In Langfang (Hebei), self-printing reached 99.3% of all certificates issued in the first half of 2026, and the customs office reported certificate issuance in seconds, helping local exporters obtain tariff reductions of more than RMB 100 million from importing countries in that period. Dalian Customs, for its part, reported that its region’s trade with other APEC economies reached RMB 191.6 billion in January-July 2026, with imports up 13.3%, supported by RCEP and China-ASEAN concessions — including Vietnamese bananas entering at zero tariff and, on the export side, ship bearings shipped to Korea under a self-printed origin certificate.

For RCEP users, the practical consequence is that origin compliance is no longer a bottleneck: if the origin basis is correctly documented, the certificate is a same-day or even same-hour operation. The compliance burden has shifted from the administrative act of obtaining a certificate to the substantive act of proving origin — which is where most errors occur.

Compliance essentials for foreign-invested traders

  1. Embed origin rules in product design. Determine at the design and sourcing stage whether the product can meet the RCEP origin criteria — WO, PE, or the applicable product-specific rules including RVC and CTC tests — and document the origin basis for each input.
  2. Use the right issuing channel. Both the customs authorities and the CCPIT can issue RCEP certificates; with mutual recognition now operating in the four pilot provinces (and expected to expand), choose the channel that fits the buyer’s requirement and the company’s inspection history.
  3. Keep three-year records. RCEP origin rules require applicants to retain, for three years, documents sufficient to prove the origin qualification and origin country of the goods, including cost breakdowns, processing steps and purchase invoices. Electronic records are acceptable.
  4. Handle special cases correctly. Back-issuance within 12 months for certificates issued after shipment; re-issuance within one year for lost or damaged certificates; and correction within one year where information needs amendment. Back-to-back certificates require the original certificate.
  5. Exploit the digital channels. Register on the International Trade Single Window, enable self-service printing, and use the “preferential origin service platform” of customs to verify origin-rule calculations before shipment, reducing rejection rates at destination.

Related reading

  • The GACC measures on import and export goods origin management under RCEP, which govern the certificate forms and origin criteria.
  • The RCEP agreement’s rules of origin chapter and product-specific rules annex.
  • Local customs and CCPIT service packages for origin certificates, including mutual-recognition pilots and sectoral origin guidance.

Sources

  • 海关总署《前 7 月大连与 APEC 其他经济体贸易额达 1916 亿元》: http://www.customs.gov.cn/customs/2026-08/18/article_2026081816062289846.html
  • 中国国际贸易促进委员会内蒙古自治区委员会《央视聚焦!原产地证书互认新政落地》: http://www.ccpitnmg.org.cn/mc_mcyw/202608/t20260824_451577.html
  • 长沙海关《RCEP 原产地应用场景式服务》: http://changsha.customs.gov.cn/changsha_customs/ztzl/rcepycdzsqzcjsfw/index.html
  • 纵览新闻(河北日报)《廊坊原产地证书”秒审秒签” 政策红利直达企业》: https://www.toutiao.com/article/7676999678478631466/

2026 年 RCEP 实务:证书互认与更智能的原产地合规

概述

2026 年,《区域全面经济伙伴关系协定》(RCEP)进入实施第五年,围绕它的合规机制正在提速。2026 年 8 月最具标志性的进展是一项全国首创:中国国际贸易促进委员会(贸促会)系统与海关在内蒙古、山东、山西、宁夏四省区开始互认原产地证书核查结果。新模式下,企业一年内已在其中一个签证机构就某一产品接受过实地核查的,另一机构不再重复核查,凭共享核查记录即可签发证书。证书签发时间压缩 1 至 3 天。

据央视 2026 年 8 月 22 日报道、内蒙古贸促会确认,互认模式直击一个真实痛点。过去,企业一年内分别向贸促会和海关申办同一产品优惠原产地证书,会面临两轮针对原材料来源和生产流程的完整实地核查。对同时服务多个自贸协定市场——RCEP 加中国—东盟、中韩以及二十余个其他安排——的出口商来说,重复核查是实实在在的成本。现在,首次核查的结论通过互认平台跨省、跨部门共享。

原产地证书对 RCEP 使用者的意义

RCEP 优惠原产地证书(及原产地声明)是享受协定 15 个成员国减税乃至零关税的凭证。规则相当精确:产品必须满足 RCEP 原产地标准——完全获得(WO)、完全由原产材料生产(PE),或符合产品特定规则(如区域价值成分 RVC、税则归类改变 CTC 测试)——且证书或声明须在出口前取得,装运后补发允许在 12 个月内办理。

2026 年的数据显示出这些证书的经济分量。2026 年 1—7 月,内蒙古、山东、山西、宁夏四省区海关和贸促会签发优惠原产地证书 69.3 万份,出口享惠货值 2201 亿元,同比分别增长 19.8% 和 15.9%;仅四省区贸促系统,上半年 RCEP 原产地证书就同比增长 165.4%。内蒙古的例子具有说明性:当地企业可在 RCEP 等 23 个自贸协定项下享受 34 个国家和地区的关税减让,上半年优惠原产地证书同比增长 23.3%。

数字化:从天级到秒级

与互认并行,各地海关正在数字化整个证书生命周期。”无纸化申报 + 智能审核 + 自助打印”模式已成标配:出口商通过中国国际贸易单一窗口提交申请,智能系统对照申报的原产地依据审核数据,证书可在申请人终端自助打印。河北廊坊海关 2026 年上半年自助打印率达 99.3%,证书签发以秒计,帮助当地企业上半年从进口国获得关税减免超 1 亿元。大连海关报告,其辖区 1—7 月与 APEC 其他经济体贸易额达 191.6 亿元、进口增长 13.3%,背后是 RCEP 与中国—东盟减让的支撑——包括越南香蕉零关税进口,以及出口侧凭自助打印原产地证书发往韩国的船用轴承。

对 RCEP 使用者而言,实际后果是原产地合规不再是瓶颈:只要原产地依据记录正确,取得证书是当日甚至当小时办结的事项。合规负担已从”获取证书”的行政动作,转移到”证明原产地”的实质动作——后者正是绝大多数错误发生的地方。

外资贸易企业合规要点

  1. 把原产地规则嵌入产品设计。在设计、采购阶段就判断产品能否满足 RCEP 原产地标准——WO、PE 或适用的产品特定规则(含 RVC 与 CTC 测试)——并为每个投入项记录原产地依据。
  2. 选择合适的签证渠道。海关和贸促会均可签发 RCEP 证书;随着互认在四省区试点(预计扩围),按买方要求和企业核查历史选择渠道。
  3. 留存三年记录。RCEP 原产地规则要求申请人自证书签发之日起三年内保存足以证明货物原产资格和原产国的文件,包括成本明细、加工工序、采购发票;电子记录亦可。
  4. 正确处理特殊情况。装运后补发限 12 个月;证书遗失、损毁可自签发之日起一年内申请重发;信息有误一年内可申请更正;背对背证书须提交初始证书正本。
  5. 用好数字通道。在单一窗口注册并开通自助打印,使用海关”优惠原产地服务平台”在出口前核验原产地计算,降低目的国退证率。

相关阅读

  • 海关总署 RCEP 项下进出口货物原产地管理办法,规范证书形式与原产地标准。
  • RCEP 协定原产地规则章节及产品特定规则附件。
  • 各地海关与贸促会原产地证书服务包,含互认试点与行业原产地指引。

来源

  • 海关总署《前 7 月大连与 APEC 其他经济体贸易额达 1916 亿元》:http://www.customs.gov.cn/customs/2026-08/18/article_2026081816062289846.html
  • 中国国际贸易促进委员会内蒙古自治区委员会《央视聚焦!原产地证书互认新政落地》:http://www.ccpitnmg.org.cn/mc_mcyw/202608/t20260824_451577.html
  • 长沙海关《RCEP 原产地应用场景式服务》:http://changsha.customs.gov.cn/changsha_customs/ztzl/rcepycdzsqzcjsfw/index.html
  • 纵览新闻(河北日报)《廊坊原产地证书”秒审秒签” 政策红利直达企业》:https://www.toutiao.com/article/7676999678478631466/

China’s New Food Shelf-Life Standard: What Foreign Food Businesses Need to Know

  • China’s first national standard dedicated to food shelf-life determination, GB/T 47141-2026, took effect on 1 August 2026, providing unified technical rules for setting, validating and managing the shelf life of food products.
    我国首部系统规范食品保质期确定与全流程管控的专项国家标准 GB/T 47141—2026《食品保质期确定指南》于 2026 年 8 月 1 日起正式实施,为食品保质期的设定、验证与管理提供了统一技术规则。
  • The standard addresses long-standing compliance gaps: shelf-life decisions made without sufficient basis, non-compliant label declarations, mismatches between storage conditions and declared shelf life, and lax handling of near-expiry stock.
    该标准直指行业长期存在的合规短板:保质期设定依据不足、标签标注不规范、贮存条件与保质期不匹配、临期食品处置不严谨等。
  • Food producers, importers and restaurant operators must re-examine how shelf life is determined for each SKU, align label wording with the standard’s methodology, and keep validation records that can stand up to regulatory inspection.
    食品生产企业、进口商和餐饮经营者须重新梳理每个 SKU 的保质期确定方法,使标签标注符合标准方法论,并留存经得起监管检查的验证记录。
  • A national “standards outreach” campaign launched in Beijing on 25 August 2026 signals that local market regulators will apply GB/T 47141-2026 as a benchmark for uniform enforcement.
    2026 年 8 月 25 日在北京启动的”国家标准走基层”宣贯活动表明,地方市场监管部门将以 GB/T 47141—2026 作为统一执法尺度的技术基准。
  • For foreign food businesses, the new standard interacts with existing import clearance rules: shelf-life claims on imported foods must be consistent with the label, the transport and storage chain, and the determination methods recognised under Chinese national standards.
    对外资食品企业而言,新标准与既有进口清关规则相互衔接:进口食品的保质期标注必须与标签、储运链条以及中国国家标准认可的确定方法保持一致。
  • Practical steps include mapping the standard’s workflow (influencing factors, shelf-life determination, verification methods and management systems) onto existing quality-management procedures and updating near-expiry stock disposal policies before the next round of supervision.
    实操要点包括:将标准的工作流程(影响因素、保质期确定、验证方法和管理制度)映射到既有质量管理程序中,并在下一轮监管前更新临期食品处置政策。

China’s New Food Shelf-Life Standard: What Foreign Food Businesses Need to Know | 中国食品保质期新国标:外资食品企业须知

Overview

On 1 August 2026, China’s first national standard dedicated to food shelf-life management, GB/T 47141-2026 “Guidelines for the Determination of Food Shelf Life” (《食品保质期确定指南》), officially took effect. Published on 28 January 2026, the standard was developed to close a longstanding regulatory gap: while the Food Safety Law and its implementing rules require food producers and operators to clearly mark shelf life and storage conditions, they did not specify a uniform technical methodology for how shelf life should be determined in the first place. The result was a patchwork of industry practice, supplier declarations and discretionary enforcement across provinces.

The standard is particularly relevant for foreign-invested food companies and importers because it touches every link of the supply chain that shelf-life claims depend on: formulation and packaging choices, storage and transport conditions, label wording, and the handling of near-expiry goods. Beijing’s municipal market regulation bureau, which hosted a national outreach and training event on 25 August 2026, reported that as of the end of 2025 the capital alone had more than 120,000 licensed food business entities, including about 53,000 catering operators. Nationwide, the standard provides the technical benchmark that local regulators will increasingly use to assess whether a producer’s shelf-life decision was “scientific and reasonable” — the phrase used in the Food Safety Law.

What the standard requires

GB/T 47141-2026 sets out, in a single framework, the general principles, influencing factors, working procedures, verification methods and management systems for determining food shelf life.

First, the standard identifies the factors that shelf life must be based on. These include product characteristics and formulation, packaging materials and sealing performance, processing and sterilisation methods, storage and transport temperature and humidity, and the expected conditions of consumer storage after purchase. Producers can no longer simply copy a shelf life from a similar product or rely on a supplier’s indicative claim without documenting the technical basis.

Second, it prescribes a determination workflow. The producer defines the product and its key quality indicators (such as sensory, physicochemical and microbiological indicators), designs shelf-life experiments or uses accelerated ageing and real-time storage data, then verifies the result against defined criteria. The standard is deliberately framework-style: it recognises both real-time and accelerated testing approaches and leaves room for industry-specific guidance to be layered on top.

Third, it requires validation records and management systems. Food business operators are expected to keep records that demonstrate how each product’s shelf life was set and verified, how storage conditions are monitored, and how near-expiry stock is identified, quarantined and disposed of. These records are the practical evidence that enforcement bodies will request during daily supervision inspections under the Measures for Daily Supervision and Inspection of Food Production and Operation.

How it affects imported and foreign-branded foods

For foreign companies, the new standard has three direct points of contact.

The first is label consistency. Under the current label rules, imported pre-packaged foods must declare a shelf life on the Chinese label, and that declaration must be consistent with the shelf life determined by the manufacturer. Where the foreign producer’s own shelf-life determination was based on different assumptions about storage and transport conditions than those encountered in the China supply chain — for example, a long ocean transit segment or a multi-tier distribution network — the imported label may no longer be defensible. Importers should document the shelf-life basis, the transport temperature profile, and any accelerated ageing data, and reconcile them with GB/T 47141-2026’s methodology.

The second is storage-condition alignment. The standard requires that the declared shelf life be matched to defined storage conditions. If a product is marked “store at room temperature” but the import clearance and warehousing chain cannot guarantee the assumed temperature range, the shelf-life claim becomes vulnerable. Importers and their customs brokers should review warehouse temperature monitoring records as part of the compliance file, not as an afterthought.

The third is near-expiry handling. Restaurants and retailers that sell imported foods are expected to implement clear policies for identifying and handling near-expiry stock. The Beijing outreach campaign highlighted that “improper handling of near-expiry food” was one of the persistent problems the standard is meant to cure. Foreign fast-food chains, cafés and supermarkets operating in China should update their internal stock-rotation and disposal procedures to align with the standard’s management-system expectations, and should be ready to demonstrate them in inspections.

Practical steps for compliance

  1. Map the standard’s framework onto your existing quality system. Identify which influencing factors are documented for each imported or locally produced SKU, and close gaps where shelf life was inherited from the supplier without verification.
  2. Reconcile label declarations with the determination methodology. For each product, ensure the label’s shelf life, storage conditions and any “best before” wording match the supporting documentation, including temperature data from the transport and warehousing chain.
  3. Keep verification records in China. Regulators will ask for records showing how shelf life was determined and validated. Even where the original experiments were performed overseas, maintain translated, accessible summaries together with the relevant certificates of analysis.
  4. Update near-expiry stock policies. Document how staff identify, segregate and dispose of near-expiry goods, and retain disposal records. This applies equally to importers selling to distributors and to end-market restaurants and retail outlets.
  5. Monitor local enforcement. As local bureaus roll out the “standards outreach” campaign and incorporate GB/T 47141-2026 into supervision, expect inspectors to test shelf-life documentation during routine checks, particularly for high-risk categories such as dairy, meat and prepared meals.

Related reading

  • Imported food registration and labelling requirements under the General Administration of Customs (GACC) regime, which interplay with shelf-life claims at the border.
  • The Food Safety Law and its 2025 amendment, which set the “scientific and reasonable” benchmark for shelf-life marking.
  • Near-expiry food disposal rules in individual provinces, which layer additional local obligations on top of the national standard.

Sources

  • 经济日报《聚焦食品保质期新标准 “国家标准走基层”宣贯活动在京举行》(2026-08-25): https://www.jingjiribao.cn/static/detail.jsp?id=678944
  • 国家市场监督管理总局 餐饮食品安全监督管理司: https://www.samr.gov.cn/spjys/index.html
  • 五河县人民政府《食品生产经营日常监督检查管理办法》: https://www.wuhe.gov.cn/zfxxgk/public/25451/53348857.html
  • 根河市人民政府《中华人民共和国食品安全法》: https://www.genhe.gov.cn/OpennessContent/show/459150.html

中国食品保质期新国标:外资食品企业须知

概述

2026 年 8 月 1 日,我国首部系统规范食品保质期管理的专项国家标准 GB/T 47141—2026《食品保质期确定指南》正式实施。该标准于 2026 年 1 月 28 日发布,旨在补齐长期存在的监管空白:虽然《食品安全法》及其实施规则要求食品生产者、经营者明确标注保质期和贮存条件,但并未规定保质期应当如何确定这一统一技术方法。此前各地在保质期问题上主要依赖行业惯例、供应商声明和各省自由裁量的执法口径,标准不统一的问题突出。

对外资食品企业和进口商而言,该标准之所以重要,是因为它触及保质期声明所依赖的供应链每个环节:配方与包装选择、储运条件、标签措辞以及临期商品处理。北京市市场监督管理局在 2026 年 8 月 25 日主办全国性宣贯培训活动时透露,截至 2025 年底,仅北京一地就有持证食品经营主体超过 12 万户,其中餐饮服务经营者约 5.3 万户。在全国范围内,该标准正在成为地方监管部门判断食品生产经营者保质期设定是否”科学合理”(《食品安全法》用语)的技术基准。

标准提出了什么要求

GB/T 47141—2026 以单一框架形式规定了食品保质期确定的总则、影响因素、工作流程、验证方法和管理制度。

首先,标准明确了保质期必须基于的因素。这些因素包括产品特性和配方、包装材料与密封性能、加工与灭菌方式、储运温湿度,以及购买后消费者储存的预期条件。生产者不能再简单地参照同类产品复制保质期,或者仅凭供应商的提示性声明,而不留任何技术依据。

其次,标准规定了确定流程。生产者须界定产品及其关键质量指标(如感官、理化、微生物指标),设计保质期试验或采用加速老化与实时储存数据,然后按既定准则验证结果。标准刻意采用框架式写法:同时认可实时试验与加速试验两种路径,并为行业专项指南的叠加留出空间。

第三,标准要求验证记录和管理制度。食品生产经营者须留存能够证明每个产品保质期如何设定与验证、贮存条件如何监控、临期库存如何识别、隔离与处置的记录。这些记录正是执法机构依据《食品生产经营日常监督检查管理办法》开展日常检查时索取的实务证据。

对进口食品和外资品牌的影响

对外资企业而言,新标准有三个直接触点。

第一是标签一致性。根据现行标签规则,进口预包装食品须在中文标签上标注保质期,且标注须与制造商确定的保质期一致。如果外国制造商确定保质期时所依据的储运条件假设与中国供应链实际情况不同——例如存在较长的海运段或多级分销网络——进口标签的保质期声明就可能站不住脚。进口商应留存保质期依据、运输温度曲线以及加速老化数据,并与 GB/T 47141—2026 的方法论进行核对。

第二是贮存条件匹配。标准要求标注的保质期与明确的贮存条件相匹配。如果产品标注”常温保存”,而进口清关和仓储链条无法保证假设的温度区间,保质期声明就会变得脆弱。进口商及其报关代理应在合规档案中一并审查仓库温度监控记录,而非事后补做。

第三是临期处理。销售进口食品的餐饮门店和零售企业须制定明确的临期商品识别与处置政策。北京宣贯活动明确指出,”临期食品处置不严谨”正是该标准希望根治的顽疾之一。在华经营的外资快餐连锁、咖啡馆和超市应及时更新内部库存轮转与处置流程,使之符合标准对管理制度的预期,并准备好在检查中予以展示。

合规实操要点

  1. 将标准框架映射到既有质量体系。逐项核对每个进口或本地生产 SKU 的影响因素是否有文档支撑,对直接沿用供应商声明、未经验证的保质期补上验证材料。
  2. 使标签声明与确定方法一致。对每个产品,确保标签上的保质期、贮存条件及”最佳食用日期”等措辞与支撑文档一致,包括储运链条的温度数据。
  3. 在中国留存验证记录。监管机关会索要保质期如何确定与验证的记录。即使原始试验在境外完成,也应在境内保存可读的中文摘要及相应检验报告。
  4. 更新临期库存政策。记录员工如何识别、隔离和处置临期商品,并留存处置凭证。这一要求同样适用于向经销商供货的进口商和终端餐饮、零售门店。
  5. 跟踪地方执法口径。随着地方局开展”标准走基层”宣贯并将 GB/T 47141—2026 纳入监督检查,预计检查人员会在例行检查中核查保质期文档,尤其是乳制品、肉类和预制菜等高危品类。

相关阅读

  • 海关总署体制下的进口食品注册与标签要求,其与保质期声明在边境环节相互衔接。
  • 《食品安全法》及其 2025 年修正案,为保质期标注确立了”科学合理”的基准。
  • 各省临期食品处置规则,在全国标准之上叠加了地方性义务。

来源

  • 经济日报《聚焦食品保质期新标准 “国家标准走基层”宣贯活动在京举行》(2026-08-25):https://www.jingjiribao.cn/static/detail.jsp?id=678944
  • 国家市场监督管理总局 餐饮食品安全监督管理司:https://www.samr.gov.cn/spjys/index.html
  • 五河县人民政府《食品生产经营日常监督检查管理办法》:https://www.wuhe.gov.cn/zfxxgk/public/25451/53348857.html
  • 根河市人民政府《中华人民共和国食品安全法》:https://www.genhe.gov.cn/OpennessContent/show/459150.html

“One Form, Two Declarations”: The Mainland–Hong Kong Road Manifest Reform Rolling Out Across China

  • In late August 2026 Hubei handled the first “one form, two declarations” (yi dan liang bao) import shipment outside the Greater Bay Area, using the inland–Hong Kong road manifest data-sharing model — a truck of cosmetics cleared via Shenzhen Bay Port to Wuhan marked the model’s first application in central China.
    2026 年 8 月下旬,湖北落地全国首票非毗邻粤港澳地区”一单两报”进口业务:一辆载有化妆品的货车经深圳湾口岸入境运抵武汉,标志着内地与香港公路舱单”一单两报”新模式首次在中部地区应用。
  • “One form, two declarations” is a 2026 cross-border trade facilitation measure introduced by the national port office: an enterprise enters road manifest data once in the China International Trade Single Window, and the system automatically translates and pushes the data to both mainland and Hong Kong customs systems.
    “一单两报”是 2026 年国家口岸办推出的跨境贸易便利化举措:企业只需在内地国际贸易”单一窗口”录入一次公路舱单数据,系统自动转译为分别符合内地与香港海关要求的申报数据并推送至两地通关系统。
  • The model removes the separate Hong Kong-side filing: companies no longer pay the Hong Kong declaration fee, cut submission time by roughly half an hour per shipment, and in the Hubei first shipment overall clearance time improved by about four hours.
    该模式取消香港端重复申报:企业无需再缴纳香港申报费用,每票货物申报时间缩短半小时以上,湖北首票整体通关时效较以往提前约 4 小时。
  • Earlier in 2026 the model was first rolled out in Guangdong and Fujian (the Min-Yue-Gang “one lock” cross-border corridor), and exports to Hong Kong and Macao have followed; customs offices across the country are now expanding coverage.
    2026 年该模式先在大湾区与福建闽粤港”跨境一锁”通道试点,出口至港澳业务也已落地;各地海关正持续拓宽”一单两报”业务覆盖范围。
  • For foreign traders moving goods by road between the mainland and Hong Kong or Macao, the practical win is a single filing in the mainland Single Window, lower cost, fewer errors and faster transit — particularly valuable for cross-border e-commerce, bonded logistics and general trade flows.
    对经公路运输在中国内地与香港、澳门之间往来货物的外贸企业,实际收益是一次录入、两地通关:成本更低、差错更少、时效更快,对跨境电商、保税物流与一般贸易货流尤其有价值。

“One Form, Two Declarations”: The Mainland–Hong Kong Road Manifest Reform Rolling Out Across China | “一单两报”:内地与香港公路舱单申报改革在全国铺开

What happened in Hubei

In late August 2026, a truck carrying cosmetics cleared customs under the supervision of Hankou Customs, a subordinate office of Wuhan Customs. The shipment originated in Hong Kong, entered via Shenzhen Bay Port, and was bound for the Dongxihu Comprehensive Bonded Logistics Park in Wuhan — the first “one form, two declarations” (yi dan liang bao) import shipment handled outside the provinces and regions adjacent to the Greater Bay Area, marking the model’s first application in central China. According to customs statistics, Hubei’s imports and exports with the Hong Kong region reached RMB 58.18 billion in the first seven months of 2026, up 153.7 per cent year on year. The forwarder, Wuhan Zhongshi International Logistics, said the single filing replaced duplicate declarations on both sides of the border, cutting declaration and cross-border communication costs.

How the mechanism works

“One form, two declarations” is a 2026 cross-border trade facilitation initiative of the national port office. Under the data-coordination mechanism between mainland customs and Hong Kong customs, an enterprise enters road manifest data once in the China International Trade Single Window. The system automatically converts the data into the formats required by the mainland and Hong Kong customs systems respectively and pushes each version to the corresponding system. The enterprise therefore files once and clears in two jurisdictions — “one form, both places” (yi zhang dan, liang di pao). Where the earlier “cross-border one lock” (kua jing yi suo) model already connects truck movements between Guangdong/Fujian and Hong Kong, the one-form model layers a single declaration on top of the existing fast-clearance channel.

Who benefits and how much

The reform was first piloted in the Greater Bay Area and in Fujian in May 2026 (the Min-Yue-Gang “one lock” corridor, where the first import and export shipments landed in May), then expanded to Hunan and Hubei, with export flows to Hong Kong and Macao also using the model. The gains are concrete. First, cost: the Hong Kong-side declaration fee is waived. Second, speed: each shipment saves roughly half an hour of declaration time, and the Hubei first shipment improved overall clearance time by about four hours. Third, accuracy: single-entry data reduces the risk of divergent filings and errors. Fourth, reach: businesses no longer need to master Hong Kong filing rules or operate in a second system. For foreign traders — general trade, cross-border e-commerce and bonded logistics moving goods by road between the mainland and Hong Kong or Macao — the compliance footprint shrinks materially.

Practical steps for companies

Companies trading by road with Hong Kong or Macao should: (1) confirm they are registered with the customs authority and hold an import/export or logistics business; (2) become a registered user of the China International Trade Single Window and opt into the one-form service; (3) enter road manifest data once in the mainland Single Window, with the system handling translation and distribution; (4) check with their supervising customs office (for example Wuhan Customs via the 12360 hotline, or the local port office) on eligibility for the specific corridor; and (5) for businesses in provinces where the model is not yet live, watch for the national rollout announced by the customs administration, which has said it will continue to widen coverage based on enterprise demand. The direction of travel is clear: for road-borne trade with Hong Kong and Macao, double filing is being replaced by single filing and two-way recognition.

The reform’s trajectory and what comes next

The rollout has moved in a clear sequence through 2026. In May, the model went live on the Min-Yue-Gang “cross-border one lock” corridor: Xiamen Customs handled the first import and export shipments under the combined “one lock plus one form” model, and Quanzhou followed within days for shipments via Shenzhen Bay Port to the Jinjiang inland port. In late May, Hunan handled its first import and export pair under the same model through Chenzhou, and in late August Hubei added the first shipment outside the Greater Bay Area’s immediate neighbourhood. Ningxia’s customs then processed a first export shipment to Macao in August. For foreign traders this sequence matters in two ways: it shows the model is standardising rather than experimental, and it suggests that customs offices in the remaining provinces will accept single-window filings for Hong Kong- and Macao-bound road cargo on a rolling basis. The national port office has said it will widen the scope of “one form, two declarations” further, so companies should treat single-filing capability as a near-term universal feature of mainland–Hong Kong road trade. For compliance teams, the practical documentation is modest: keep the single-window submission reference, retain the manifest data the system translated, and maintain the linkage between the mainland manifest number and the Hong Kong cargo details so that any post-clearance verification can be answered quickly.

Sources


“一单两报”:内地与香港公路舱单申报改革在全国铺开

湖北发生了什么

2026 年 8 月下旬,一辆载有化妆品的货车在武汉海关所属汉口海关监管下通关放行。该票货物从香港出发,经深圳湾口岸入境,运抵武汉东西湖综合保税物流园区——这是全国首票非毗邻粤港澳地区应用内地与香港公路舱单”一单两报”新模式的进口货物,标志着该模式首次在华中地区落地。据海关统计,2026 年前 7 个月,湖北省对香港地区进出口 581.8 亿元,同比增长 153.7%。承运企业武汉中实国际物流表示,新模式以一次录入取代两地重复申报,节省了申报成本与跨境沟通成本。

机制如何运作

“一单两报”是 2026 年国家口岸办推出的跨境贸易便利化举措。依托内地海关与香港海关建立的数据协同机制,申报企业只需在内地国际贸易”单一窗口”录入一次公路舱单数据,系统便会自动将信息转译为分别符合内地与香港海关要求的申报数据,并推送至对应的通关系统——一次申报、两地通关,实现”一张单、两地跑”。在闽粤港”跨境一锁”快速通关模式已实现粤闽与香港之间货车”不换车、不换锁”自动快速验放的基础上,”一单两报”在既有快通通道上叠加单次申报。

谁受益、受益多少

该改革 2026 年 5 月先在大湾区与福建落地(闽粤港”跨境一锁”通道首批进出口业务于 5 月完成),随后扩展至湖南、湖北,对港澳出口业务同样适用。收益具体可感:其一,成本——香港端申报费用予以减免;其二,速度——每票货物申报时间节约半小时以上,湖北首票整体通关时效提前约 4 小时;其三,准确——单次录入减少两地数据不一致与差错风险;其四,可达——企业无需再适应香港申报规则与第二套系统界面。对经公路在中国内地与香港、澳门之间运输货物的一般贸易、跨境电商与保税物流企业,合规负担显著下降。

企业操作要点

与港澳开展公路运输贸易的企业应:(1)确认已在海关注册登记、具备进出口或物流业务资质;(2)成为中国国际贸易”单一窗口”登记用户并选择”一单两报”服务;(3)在内地”单一窗口”一次性录入公路舱单数据,由系统完成转译与分发;(4)向主管海关(如武汉海关 12360 热线)或地方口岸部门核实所在通道的适用条件;(5)模式尚未开通省份的企业,关注海关总署宣布的全国推广——署方已表示将立足企业需求持续拓宽”一单两报”覆盖范围。方向明确:对港澳公路运输货物,两地重复申报正被”一次录入、两地互认”取代。

改革轨迹与下一步

落地在 2026 年呈清晰的推进序列。5 月,模式在闽粤港”跨境一锁”通道上线:厦门海关完成”一锁+一单”组合模式下首批进出口业务,泉州随后数日即经深圳湾口岸将货物运抵晋江陆地港完成首票。5 月下旬,湖南经郴州完成同模式首批进出口货物;8 月下旬,湖北落地粤港澳邻近区域之外的首票。8 月,银川海关办理宁夏首票对澳门出口。对外贸企业,这一序列有两重含义:其一,模式正在标准化而非试验化;其二,提示其余省份海关将滚动接受面向港澳公路货物的单一窗口申报。国家口岸办已表示将进一步拓宽”一单两报”覆盖范围,企业应把单次申报能力视为内地—香港公路贸易近期普遍化的功能。对合规团队,实际留痕要求不高:保留单一窗口申报回执、留存系统转译的舱单数据,并维持内地舱单号与香港货物信息的对应关系,以便事后核验可快速回应。

Sources

Bonded repair (global repair) pilot expansion

  • The 2026 measures let export products and parts enter comprehensive bonded zones for bonded repair and re-export, free of the repair catalogue and used-machinery import ban. 2026年措施允许出口产品及零部件进入综合保税区开展保税维修并复运出境,不受维修目录与旧机电进口禁令限制。
  • China’s bonded-repair product catalogue expanded from 97 to 276 tariff lines across four batches. 中国保税维修产品目录历经四批由97个增至276个税号。
  • Bonded repair supports “Made in China” after-sales service and extends the domestic industry value chain. 保税维修支撑”中国制造”售后服务体系,延伸国内产业价值链。
  • Nationwide bonded-zone repair imports and exports reached RMB 375.73 billion in 2025, up 3.2%. 2025年全国保税区维修进出口达3757.3亿元,同比增长3.2%。
  • Lingang’s Yangshan zone posted RMB 25.3 billion bonded-repair trade in Jan–Apr 2026, up 108.4%. 临港洋山片区2026年1至4月保税维修贸易达253.09亿元,同比增长108.41%。

Bonded repair (global repair) pilot expansion | 保税维修(全球维修)业务试点扩大

China is scaling up its bonded repair (sometimes called “global repair”) regime, letting goods be brought into comprehensive bonded zones (CBZs) for repair and then re-exported. For foreign manufacturers, brands and supply-chain operators, this creates a low-friction way to service global products through a China base while keeping goods outside the domestic customs flow until a decision is made to sell them inland.

Overview

Bonded repair means imported or exported goods enter a CBZ, are repaired using imported or domestic parts, and leave the zone again (usually re-exported) without paying import duty or VAT on the goods themselves during the repair stay. It is a pillar of China’s push to upgrade its processing-trade and after-sales service capabilities.

The 2026 State Council measures

General Office of the State Council Letter [2026] No. 40 — “Several Measures to Promote the Capacity-Building and Quality Improvement of Comprehensive Bonded Zones” (国办函〔2026〕40号, issued 2026-04-14) explicitly promotes bonded repair:

  • Domestic export products and parts may enter CBZs for repair and re-export.
  • Such repair operations are exempt from the bonded-repair product catalogue restriction and the used/old machinery import ban.
  • Authorities will explore negative-list management for repair businesses.
  • A phased rollout will allow some repaired goods to be transferred into domestic sale (内销) under control.

This is a meaningful liberalization: previously repair scope was constrained by the catalogue and old-machinery import rules; the 2026 measures loosen both for export-bound repair.

What it means for foreign firms

  • A global brand can route warranty/refurbishment repair of its exported products through a China CBZ without triggering full import formalities.
  • Spare parts can be brought in and consumed in repair without duty, provided goods ultimately re-export.
  • The negative-list approach signals broader, catalogue-light access going forward.

Catalogue expansion: 97 to 276 tariff lines

China’s bonded-repair product catalogue has expanded in four batches:

BatchTimingAdded linesResulting total
Initial——97 tariff lines
Batch 1–3prior years+20117
Batch 4Dec 2025+179276 tariff lines

The fourth batch, added in December 2025, brought 179 new items, taking the catalogue from 97 to 276 tariff lines. Coverage now spans aviation, ships, engineering machinery, precision electronics, and medical devices — sectors where high-value, long-life goods generate recurring repair demand.

This expansion widens the universe of products eligible for streamlined bonded repair even before the catalogue exemption in the 2026 measures is applied.

Why bonded repair matters strategically

  • After-sales service for “Made in China”: Repair hubs in CBZs let Chinese exporters and foreign brands support products sold worldwide, keeping service close to manufacturing.
  • Value-chain extension: Repair, refurbishment and reverse-logistics add high-skill jobs and keep economic value onshore.
  • Supply-chain resilience: A CBZ repair base can serve Asia-Pacific or global markets with bonded, duty-deferred flows.

Latest trade figures

The regime is already large and growing:

  • 2025 nationwide: bonded-zone repair imports and exports reached RMB 375.73 billion, up 3.2% year-on-year.
  • Lingang (Shanghai) Yangshan: 2025 bonded repair trade RMB 63.75 billion (+59.2%); Jan–Apr 2026 RMB 25.309 billion, up 108.41% — showing accelerating momentum after the policy push.

These numbers indicate bonded repair is shifting from pilot to mainstream logistics activity, with Lingang as a flagship growth pole.

Sources


保税维修(全球维修)业务试点扩大

中国正在扩大保税维修(亦称”全球维修”)制度,允许货物进入综合保税区(CBZ)维修后再复运出境。对于外国制造商、品牌商及供应链运营方而言,这提供了一种低摩擦的全球化产品售后路径——以中国为基地开展维修,同时使货物在决定内销前始终处于海关特殊监管流程之外。

概述

保税维修是指进口或出口货物进入综合保税区,使用进口或国产零部件进行维修,随后离开园区(通常复运出境),维修停留期间货物本身免予缴纳进口关税与增值税。它是中国推动加工贸易升级与售后服务能力建设的支柱举措。

2026年国务院措施

《国务院办公厅关于促进综合保税区扩能提质的若干措施》(国办函〔2026〕40号,2026年4月14日印发)明确促进保税维修:

  • 国内出口产品及零部件可进入综合保税区开展维修并复运出境。
  • 此类维修业务不受保税维修产品目录限制,亦不受旧机电进口禁令约束。
  • 主管部门将探索负面清单管理模式。
  • 将分阶段推进部分已维修货物转入内销(在监管下)。

这是一次实质性放开:此前维修范围受目录与旧机电进口规则约束,2026年措施对面向出口的维修同时弱化了两项限制。

对外资企业的含义

  • 全球品牌可将其出口产品的保修/翻新维修通过中国综合保税区流转,无需触发完整进口手续。
  • 零部件可带入并在维修中耗用而免关税,前提是货物最终复出口。
  • 负面清单思路预示着未来更宽、弱目录化的准入。

目录扩容:由97增至276个税号

中国保税维修产品目录历经四批扩容:

批次时间新增税号累计总数
初始——97个税号
第1–3批往年+20117
第4批2025年12月+179276个税号

第四批于2025年12月新增179项,使目录由97增至276个税号。覆盖范围现已涵盖航空、船舶、工程机械、精密电子及医疗器械——这些高价值、长寿命行业产生持续的维修需求。

即便在2026年措施目录豁免适用之前,此次扩容已拓宽了可享简化保税维修的产品范围。

保税维修的战略意义

  • “中国制造”售后支撑: 综合保税区维修枢纽使中国出口商与外国品牌能够服务全球售出产品,令服务贴近制造。
  • 价值链延伸: 维修、翻新与逆向物流创造高技能岗位,并将经济价值留在本土。
  • 供应链韧性: 综合保税区维修基地可以保税、递延关税的流向服务亚太乃至全球市场。

最新贸易数据

该制度规模已具且持续增长:

  • 2025年全国: 保税区维修进出口达3757.3亿元,同比增长3.2%。
  • 临港(上海)洋山: 2025年保税维修贸易637.5亿元(+59.2%);2026年1至4月253.09亿元,同比增长108.41%——政策推动后动能加速。

这些数据表明,保税维修正由试点走向主流物流活动,临港为标志性增长极。

来源

Importing Food into China: GACC overseas-facility registration and Chinese labelling (Decrees 248 & 249)

  • All overseas producers, processors and storage facilities of food destined for China must register with the General Administration of Customs (GACC) under Decree 248 — no registration, no import.
    所有向中国出口食品的境外生产、加工、贮存企业,均须依据海关总署第 248 号令在海关总署(GACC)注册——无注册,不得进口。
  • Registration follows two tracks: 18 higher-risk food categories (meat, dairy, aquatic, honey, health food, etc.) are registered via the exporting country’s competent authority (recommendation), while all other foods use the simpler “enterprise self-application” mode.
    注册分两条路径:18 类较高风险食品(肉、乳、水产、蜂产品、保健食品等)由出口国主管当局推荐注册;其余食品采用更简便的”企业自行申请”模式。
  • Decree 249 (Import/Export Food Safety Measures) governs the whole clearance chain: overseas facility registration, importer and exporter record-filing, quarantine approval, inspection, and Chinese labelling.
    第 249 号令(进出口食品安全管理办法)管辖整条清关链:境外企业注册、进口商与出口商备案、检疫审批、查验及中文标签。
  • The GACC registration number must be printed on the Chinese label of imported food — Customs checks the label at clearance, and mismatches or missing numbers cause rejection.
    境外生产企业的注册编号须印制在进口食品的中文标签上——海关在清关时查验标签,编号缺失或不符将导致退运。
  • Since GACC Announcement No. 105 of 2024, overseas exporters can no longer apply for registration directly — they must appoint a China Responsible Agent (CRA) authorized to use the China e-Port key and the upgraded Single Window system.
    自海关总署 2024 年第 105 号公告起,境外出口商不得再直接申请注册——须委托获授权使用中国电子口岸密钥及升级版单一窗口系统的境内责任代理人(CRA)办理。
  • Imported food must meet Chinese food-safety national standards; labels and instructions must be in Chinese, and for health food / foods for special dietary use the Chinese label must be printed on the smallest sales package, not merely stuck on.
    进口食品须符合中国食品安全国家标准;标签与说明书须为中文;保健食品、特殊膳食用食品的中文标签须印制在最小销售包装上,不得加贴。
  • Importers must keep import-and-sale records and audit their overseas suppliers; non-compliant food can be ordered destroyed or returned, and serious breaches can trigger suspension of a facility’s or country’s imports.
    进口商须建立进口与销售记录并审核境外供应商;不合格食品可被责令销毁或退运,严重违规可触发对某企业或国家(地区)的暂停进口。

Importing Food into China: GACC overseas-facility registration and Chinese labelling (Decrees 248 & 249) | 食品进口中国:海关总署境外生产企业注册与中文标签(248 号令与 249 号令)

Overview

Food is one of China’s most tightly controlled import categories — and for foreign producers, the gatekeeping starts long before a shipment reaches port. Since 1 January 2022, two General Administration of Customs (GACC) rules have governed the field: Decree 248, the *Regulations on the Registration and Administration of Overseas Producers of Imported Food*, and Decree 249, the *Administrative Measures on Import and Export Food Safety*. Together they require every overseas food facility to register with GACC, set out how imports are inspected and cleared, and mandate Chinese labelling that carries the facility’s registration number.

For a foreign brand or a China-based importer, understanding these rules is the difference between smooth clearance and rejected, destroyed or returned goods. This guide walks through who must register, the two registration tracks, the 2024 change requiring a China Responsible Agent, labelling rules, and the importer’s ongoing obligations — grounded in the official GACC decrees and announcements.

The two pillars: Decree 248 and Decree 249

  • Decree 248 — overseas producer registration. All overseas producers, processors and storage facilities of food bound for China must obtain GACC registration. (Producers of food additives and food-related products are excluded.) Registration confirms the facility operates under an equivalent food-safety system, is approved and supervised in its home country, and can meet Chinese standards.
  • Decree 249 — import/export food safety. This measure covers the full clearance chain: country-system evaluation, overseas facility registration, importer/exporter record-filing (备案), quarantine approval, document review, on-site inspection, sampling, and labelling. It also empowers Customs to raise inspection rates, suspend or ban imports, and order destruction or return of non-compliant food.

Both took effect 1 January 2022 and were introduced via GACC Announcement No. 103 of 2021.

Two registration tracks

Not all foods are treated alike. Decree 248 splits registration into two paths:

  1. Competent-authority recommendation (18 categories). For 18 higher-risk food categories, the exporting country’s/region’s competent authority must vet and recommend the facility to GACC. These 18 categories include: meat and meat products, casings, aquatic products, dairy, bird’s nest and its products, bee products, eggs and egg products, edible oils and fats and oilseeds, stuffed wheaten foods, edible grains, grain-milling products and malt, preserved and dehydrated vegetables and dried beans, condiments, nuts and seeds, dried fruit, unroasted coffee and cocoa beans, foods for special dietary uses, and health food.
  2. Enterprise self-application (all other foods). Facilities producing foods outside the 18 categories may register themselves through GACC’s China International Trade Single Window, using a simpler self-application mode.

GACC calibrates the required materials by food type — considering raw-material origin, processing technology, food-safety history, target consumers and consumption method.

The 2024 change: you now need a CRA

A pivotal change arrived with GACC Announcement No. 105 of 2024: from 5 September 2024, overseas exporters (and, in the self-application track, overseas producers) can no longer submit registration applications directly. They must appoint a China Responsible Agent (CRA / 境内代理人) — a mainland-China company authorized by GACC to use the China e-Port key — to log in to the upgraded Administrative Counterpart Management Subsystem (v3.0) and file on their behalf.

Practically, this means a foreign producer today typically works through a qualified CRA for registration and ongoing filings. Choose the CRA carefully: it becomes your interface with Customs and shares responsibility for the accuracy of submissions.

Chinese labelling — where clearances succeed or fail

Decree 249 sets strict labelling rules, and Customs checks them at the border:

  • Packaging, labels and markings must comply with Chinese laws and food-safety national standards; where a manual is legally required, a Chinese-language manual must accompany the product.
  • The GACC registration number of the overseas producer must appear on the Chinese label of imported food (per Decree 249) — this is a core clearance check.
  • For frozen/chilled meat, inner and outer packaging must carry durable, clear Chinese (or Chinese + exporting-country) markings: country of origin, product name, producer registration number, production batch; the outer package must state specification, origin (to state/province/city), destination, production date, shelf life and storage temperature, and must name the destination as the People’s Republic of China with the official inspection mark.
  • For aquatic products, similar detailed markings apply (name and scientific name, specification, production date/batch, shelf life and storage, production method, production area, all producers involved, registration numbers and addresses).
  • For health food and foods for special dietary use, the Chinese label must be printed on the smallest sales package — it may not simply be pasted on.

The importer’s ongoing obligations

Registration is not a one-off. Under Decree 249, the food importer must:

  • Record-file with the customs office of its domicile (and the overseas exporter/agent must record-file with GACC).
  • Maintain an import-and-sale record system (product name, net content/spec, quantity, production date, batch, shelf life, exporter and buyer details, delivery date), kept for at least 6 months beyond shelf life (or 2 years if no shelf life).
  • Operate a supplier/overseas-facility audit system, focusing on food-safety risk controls and Chinese-standard conformity.
  • Recall and report to Customs any food found non-compliant or potentially harmful.

Customs can raise sampling rates, require batch-by-batch third-party test reports, and — in serious cases — suspend or ban imports from a facility or country.

What to do next

  1. Confirm your category: is your food in the 18 recommendation categories or the self-application track? Check HS classification via the Single Window.
  2. Appoint a qualified CRA (mandatory since Sep 2024) and gather registration materials.
  3. Design compliant Chinese labels early — include the GACC registration number and meet food-safety national standards.
  4. Record-file the importer and overseas exporter/agent with the relevant customs offices.
  5. Verify quarantine-approval needs before signing trade contracts (some products need advance approval).
  6. Build import-and-sale records and a supplier audit into your standard operating procedures.
  7. Monitor GACC announcements for category-specific requirements and country-level suspensions.

Sources

  • GACC Decree No. 248, Regulations on the Registration and Administration of Overseas Producers of Imported Food (2021, effective 1 Jan 2022) — General Administration of Customs: www.customs.gov.cn.
  • GACC Decree No. 249, Administrative Measures on Import and Export Food Safety (2021, effective 1 Jan 2022) — www.customs.gov.cn.
  • GACC Announcement No. 103 of 2021 on implementation of Decrees 248 and 249 — www.customs.gov.cn.
  • GACC Announcement No. 105 of 2024 (China Responsible Agent requirement, effective 5 Sep 2024) — www.customs.gov.cn.
  • China International Trade Single Window / Overseas Food Producer Registration System: www.singlewindow.cn; registration query: cifer.singlewindow.cn.

Related reading

  • Import-export licensing & customs clearance
  • Customs AEO Certification in China
  • Two-Step Customs Declaration & the 2025 Declaration Rules Overhaul

食品进口中国:海关总署境外生产企业注册与中文标签(248 号令与 249 号令)

概述

食品是中国管控最严格的进口类别之一——而对境外生产者而言,把关早在货物抵港前就已开始。自 2022 年 1 月 1 日起,两部海关总署(GACC)规章统领该领域:第 248 号令《进口食品境外生产企业注册管理规定》与第 249 号令《进出口食品安全管理办法》。二者共同要求每一家境外食品企业向海关总署注册,规定进口食品如何查验与清关,并强制印有企业注册编号的中文标签。

对外国品牌或境内进口商而言,读懂这些规则,是顺利清关与货物被退运、销毁之间的分野。本指南依据海关总署官方规章与公告,讲解谁须注册、两条注册路径、2024 年新增的境内责任代理人要求、标签规则及进口商的持续义务。

两大支柱:248 号令与 249 号令

  • 248 号令——境外生产企业注册。 所有向中国出口食品的境外生产、加工、贮存企业均须取得海关总署注册(食品添加剂、食品相关产品的企业除外)。注册确认企业所在国家(地区)食品安全体系等效、企业依法获批并受监管,且能满足中国标准。
  • 249 号令——进出口食品安全。 该办法覆盖整条清关链:国家体系评估、境外企业注册、进口商/出口商备案、检疫审批、单证审核、现场查验、抽检与标签。并授权海关提高查验比例、暂停或禁止进口、责令不合格食品销毁或退运。

二者均于 2022 年 1 月 1 日施行,经海关总署 2021 年第 103 号公告发布实施。

两条注册路径

食品并非一视同仁。248 号令将注册分为两条路径:

  1. 主管当局推荐(18 类)。 对 18 类较高风险食品,须由出口国(地区)主管当局审核并向海关总署推荐注册。这 18 类包括:肉与肉制品、肠衣、水产品、乳品、燕窝与燕窝制品、蜂产品、蛋与蛋制品、食用油脂和油料、包馅面食、食用谷物、谷物制粉工业产品和麦芽、保鲜和脱水蔬菜以及干豆、调味料、坚果与籽类、干果、未烘焙的咖啡豆与可可豆、特殊膳食食品、保健食品。
  2. 企业自行申请(其余食品)。 生产 18 类以外食品的企业,可通过海关总署的中国国际贸易单一窗口,以更简便的自行申请模式注册。

海关总署按食品类别校准所需材料——综合考虑原料来源、加工工艺、食品安全历史、消费人群与食用方式。

2024 年变化:现须委托 CRA

一项关键变化随海关总署 2024 年第 105 号公告到来:自 2024 年 9 月 5 日起,境外出口商(在自行申请路径下亦含境外生产者)不得再直接提交注册申请,须委托一家境内责任代理人(CRA/境内代理人)——一家获海关总署授权使用中国电子口岸密钥的中国大陆公司——登录升级后的海关行政相对人统一管理子系统(3.0 版)代为办理。

实务上,这意味着今天的境外生产者通常通过合格 CRA 办理注册与后续报送。CRA 须审慎选择:它是你与海关的接口,并对报送准确性共担责任。

中文标签——清关成败的关键

249 号令设定了严格的标签规则,海关在口岸查验:

  • 包装、标签与标识须符合中国法律法规与食品安全国家标准;依法应有说明书的,须附中文说明书。
  • 境外生产企业的注册编号须出现在进口食品的中文标签上(依 249 号令)——这是核心清关查验项。
  • 对冷冻/冷藏肉类,内外包装须有牢固、清晰的中文(或中文+出口国文字)标识:产地国家、品名、生产企业注册编号、生产批号;外包装须标明规格、产地(具体到州/省/市)、目的地、生产日期、保质期、储存温度,并须标注目的地为中华人民共和国,加施官方检验检疫标识。
  • 对水产品,适用类似的详细标识(商品名与学名、规格、生产日期/批号、保质期与保存条件、生产方式、生产地区、所涉全部生产加工企业名称、注册编号及地址)。
  • 对保健食品、特殊膳食用食品,中文标签须印制在最小销售包装上,不得加贴。

进口商的持续义务

注册并非一劳永逸。依 249 号令,食品进口商须:

  • 向住所地海关备案(境外出口商/代理商亦须向海关总署备案)。
  • 建立进口与销售记录制度(食品名称、净含量/规格、数量、生产日期、批号、保质期、出口商与购货者信息、交货日期),保存期限不少于保质期满后 6 个月(无保质期的为销售后 2 年以上)。
  • 建立境外出口商/生产企业审核制度,重点关注食品安全风险控制与中国标准符合性。
  • 对发现不合格或可能有害的食品,实施召回并向海关报告。

海关可提高抽检比例、要求逐批第三方检验报告,情节严重者可对某企业或国家(地区)暂停或禁止进口。

下一步建议

  1. 确认类别: 你的食品属于 18 类推荐还是自行申请路径?经单一窗口核对 HS 分类。
  2. 委托合格 CRA(2024 年 9 月起强制),并备齐注册材料。
  3. 尽早设计合规中文标签——含 GACC 注册编号,满足食品安全国家标准。
  4. 为进口商与境外出口商/代理人办理备案(向相关海关)。
  5. 签约前核实检疫审批需求(部分产品需事先审批)。
  6. 将进口与销售记录及供应商审核纳入标准作业流程。
  7. 持续关注海关总署公告,掌握分类专属要求与国家级暂停措施。

来源

  • 海关总署第 248 号令《中华人民共和国进口食品境外生产企业注册管理规定》(2021,2022 年 1 月 1 日施行)——海关总署:www.customs.gov.cn。
  • 海关总署第 249 号令《中华人民共和国进出口食品安全管理办法》(2021,2022 年 1 月 1 日施行)——www.customs.gov.cn。
  • 海关总署 2021 年第 103 号公告(248、249 号令实施相关事宜)——www.customs.gov.cn。
  • 海关总署 2024 年第 105 号公告(境内责任代理人 CRA 要求,2024 年 9 月 5 日起)——www.customs.gov.cn。
  • 中国国际贸易单一窗口/进口食品境外生产企业注册管理系统:www.singlewindow.cn;注册信息查询:cifer.singlewindow.cn。

相关阅读

  • 进出口许可与海关清关
  • 中国海关 AEO 认证
  • 进口货物”两步申报”全面推广与申报管理规定修订

Customs AEO Certification in China: the “green pass” for trusted traders

  • From 1 April 2026, China’s overhauled enterprise credit management rules (GACC Order No.282) split customs credit grades into five tiers, and both “Senior Certified” and “Certified” enterprises are now formally China’s Authorized Economic Operators (AEO).
    自2026年4月1日起,新版《海关注册登记和备案企业信用管理办法》(海关总署令第282号)将信用等级优化为五级,其中”高级认证企业”与”认证企业”均被正式界定为中国的”经认证的经营者”(AEO)。
  • AEO is the single most valuable customs status for a foreign-invested trader: it unlocks priority clearance, fewer inspections, and mutual-recognition benefits with China’s AEO partners abroad.
    AEO 是外资贸易企业最值得争取的海关身份:它带来优先办理、降低查验监管频次、优化服务等便利,并可在与中国互认的海外海关享受同等通关便利。
  • As of end-2025, China had 6,876 AEO enterprises — just 1% of active traders, yet they accounted for nearly 40% of national trade value, underscoring AEO’s role as a “main force” of foreign trade.
    截至2025年底,全国 AEO 企业 6,876 家,数量仅占进出口实绩企业的 1%,却贡献了全国近 40% 的贸易额,凸显 AEO 作为外贸”主力军”的分量。
  • The 2026 reform adds a mid-tier “Certified enterprise” grade and a credit-repair mechanism, widening the runway for SMEs to climb toward AEO rather than staying in the plain “regular” tier.
    2026 年改革新增中层的”认证企业”等级并引入信用修复机制,拓宽了中小企业向上攀登至 AEO 的通道,而不再停留于”常规企业”。
  • Certification standards were rewritten in 2026: a “general + specific” framework now splits the general standard into two enterprise types — import/export consignors and customs brokers — and aligns with the WCO 2025 SAFE Framework’s call to extend AEO to SMEs.
    2026 年认证标准重构为”通用标准+单项标准”框架,通用标准细分为进出口货物收发货人与报关企业两类,并对接世界海关组织 2025 版《全球贸易安全与便利标准框架》(SAFE)关于 AEO 覆盖中小微企业的要求。
  • AEO is attainable for foreign-invested entities (WFOEs, JVs, representative-office procurement arms) — there is no domestic-ownership prerequisite; the path runs through local customs credit cultivation and a standard-based audit.
    AEO 对外商投资企业(外商独资、合资、代表处采购机构等)开放,无内资门槛;申请路径是通过注册地海关的信用培育与企业自我对标、接受认证审核。
  • Practical moves: engage your local Customs for credit cultivation early, map the 2026 Senior-Certified-Enterprise Standard to your compliance program, and leverage AEO mutual recognition if you also import/export through a partner economy.
    操作建议:尽早对接主管海关参与信用培育,将 2026 版《海关高级认证企业标准》映射进自身合规体系,并在同时与互认经济体往来的场景中善用 AEO 互认红利。

Customs AEO Certification in China: the “green pass” for trusted traders | 中国海关 AEO 认证:可信贸易商的”绿色通行证”

Overview

For any foreign-invested enterprise that moves goods across China’s border — a WFOE importing components, a JV exporting finished product, or a representative office’s procurement arm — customs treatment is rarely neutral. The difference between being a “regular” trader and an Authorized Economic Operator (AEO) can mean the gap between routine inspections and near-frictionless clearance. In 2026, China sharpened this distinction: a full rewrite of its enterprise credit-management rules, a new mid-tier certification grade, and refashioned certification standards all came into force.

This article explains what AEO means under China’s 2026 framework, who qualifies, what benefits and obligations it carries, how it differs from the old three-tier system, and the concrete steps a foreign-invested company should take to pursue or leverage it. It is informational; confirm the live standards and your eligibility with GACC, your local Customs, and qualified PRC counsel.

What changed in 2026

Two instruments define the new landscape:

  • GACC Order No.282 — Measures for the Credit Administration of Enterprises Registered and Filed with Customs (《海关注册登记和备案企业信用管理办法》). Adopted at the GACC executive meeting on 30 December 2025, promulgated on 13 January 2026, and effective from 1 April 2026. It replaces the 2021 version and is the legal backbone of customs credit management.
  • Revised certification standards. GACC’s 31 March 2026 policy interpretation revises the *Senior Certified Enterprise Standard* (formerly Announcement No.106 of 2022) and introduces a *Certified Enterprise Standard*, both taking effect together with Order No.282 on 1 April 2026.

The headline structural change: credit grades moved from three tiers to five — Senior Certified Enterprise (高级认证企业), Certified Enterprise (认证企业), Regular Enterprise (常规企业), Discredited Enterprise (失信企业), and Seriously Discredited Enterprise (严重失信企业). Critically, Article 8 of Order No.282 states that both Senior Certified and Certified enterprises are China’s AEOs, and that GACC conducts AEO mutual-recognition cooperation with other countries’ and regions’ customs and grants facilitated treatment to recognized partners.

Why AEO matters for foreign traders

The numbers make the case. According to GACC, as of end-2025 there were 6,876 AEO enterprises nationwide — only about 1% of enterprises with actual import/export performance, yet they contributed nearly 40% of national trade value. AEO status is, in GACC’s own phrasing, both a domestic “VIP pass” for customs clearance and a “green pass” for expanding into international markets.

Concretely, AEO enterprises receive a bundle of facilitation measures, generally including:

  • Priority processing of customs formalities;
  • Reduced supervision frequency, e.g., lower inspection rates and fewer routine checks;
  • Optimized services, such as pre-declaration guidance and dedicated coordinator support in many localities;
  • Mutual-recognition benefits when trading with China’s AEO-partner economies, where the counterpart customs extends comparable facilitation.

For a foreign-invested company, the value is tangible: shorter dwell time at port, lower compliance and demurrage cost, and a more predictable clearance profile — especially valuable for time-sensitive or high-volume supply chains.

The new five-tier ladder and credit repair

Beyond adding AEO clarity, the 2026 reform responds to small and medium enterprises’ needs:

  • A new mid-tier “Certified Enterprise” grade gives firms a stepping stone below Senior Certified but above plain Regular status, broadening the path for more traders to enjoy AEO treatment.
  • A credit-repair mechanism for discredited information creates a “punish the dishonest, repair conveniently” loop, encouraging firms to treasure and actively restore their credit.
  • A tolerance (容错) mechanism grants both AEO and discredited enterprises room for error in defined circumstances, supporting stable operations.
  • A sounder scope of application, extending credit management across registered and filed enterprises more consistently.

This matters for foreign investors because it signals that China’s customs regime is increasingly merit-based: good compliance history is convertible into concrete clearance advantage, and a past misstep is not necessarily a permanent bar.

The 2026 certification standards

The 31 March 2026 interpretation sets out the *why* and *what* of the rewritten standards:

  • Framework continuity with refinement. The “general standard + specific standard” architecture continues, but the general standard is now split into two enterprise types — import/export consignors (收发货人) and customs brokers (报关企业) — reflecting their different risk and operational profiles.
  • International alignment. The revision deliberately responds to the WCO 2025 SAFE Framework, which calls for AEO to cover small and medium enterprises and emphasizes compliance records, supply-chain security commitments, business-record management, and financial viability.
  • Reduced burden. In response to enterprise feedback that old indicators were overly cumbersome and financially rigid, the revision improves adaptability and operability, lowering the practical threshold for SMEs.

In short, to certify, an enterprise must demonstrate — across areas such as internal control, financial status, compliance history, and trade-security management — that it meets the applicable standard. Customs provides credit cultivation (信用培育) services to help enterprises strengthen integrity and compliance awareness before and during the application.

Who can apply, and the process

AEO is not restricted to domestic-owned firms. Any enterprise registered or filed with Customs — including foreign-invested WFOEs, joint ventures, and the procurement arms of representative offices — may pursue certification provided it meets the standard.

The typical path:

  1. Engage your local Customs early for credit cultivation; GACC explicitly runs enterprise credit-cultivation as part of the credit-management regime.
  2. Self-assess against the applicable standard (Senior Certified or Certified; consignor or broker variant).
  3. Submit the application through the designated Customs channel and undergo the certification audit.
  4. Maintain the standard continuously — AEO is granted on the basis of ongoing compliance, not a one-off check, and GACC applies simplified recertification for senior-certified enterprises under announced procedures.

What to do next

  • Start the cultivation conversation now. If you import or export material volumes, ask your local Customs about its credit-cultivation program rather than waiting for a problem.
  • Map the 2026 Senior-Certified-Enterprise Standard to your compliance program. Identify gaps in internal control, financial documentation, trade-security, and prior-compliance records, and close them deliberately.
  • Use AEO as a supplier-selection signal. When sourcing in China, an AEO-certified local supplier is statistically a lower-risk, faster-clearing partner — relevant to the due-diligence workflow covered in our sourcing articles.
  • Leverage mutual recognition abroad. If you also operate in or ship through an economy that has an AEO mutual-recognition arrangement with China, coordinate the two certifications to compound the clearance benefit.
  • Build a credit-repair and tolerance playbook. Know the procedures so a corrective action today does not become a permanent discredited status tomorrow.

Practical example

“Helvetia Components,” a Swiss-invested WFOE in Suzhou, imports precision parts and exports assemblies across Asia. Frustrated by periodic inspections that disrupted just-in-time delivery, it enrolled in its local Customs’ credit-cultivation program in early 2026, mapped its internal-control and trade-security documentation to the new Senior-Certified-Enterprise Standard, and closed gaps in shipment-traceability records. After certification, its inspection frequency dropped and clearance became predictable; because Switzerland is among China’s AEO mutual-recognition partners, its European flows also smoothed. The lesson: AEO is not a paperwork trophy — it is a structural clearance advantage that compounds across borders.

Sources

  • General Administration of Customs — Order No.282, Measures for the Credit Administration of Enterprises Registered and Filed with Customs (effective 1 April 2026): http://www.customs.gov.cn
  • GACC policy interpretation, “Measures for the Administration of the Customs Senior Certified Enterprise Standard and the Customs Certified Enterprise Standard” (31 March 2026): http://gec.customs.gov.cn/customs/2026-03/31/article_2026033118200739179.html
  • GACC news, “Customs credit management upgraded to support enterprises” (13 February 2026): http://www.customs.gov.cn/customs/2026-02/13/article_2026021311434812790.html
  • State Council Gazette (official portal): https://www.gov.cn/gongbao

Related reading

  • see also: Two-Step Customs Declaration & the 2025 Declaration Rules Overhaul (69-two-step-customs-declaration)
  • see also: Import-export licensing & customs clearance (50-import-export-customs-clearance)
  • see also: RCEP benefits for foreign investors (42-rcep-benefits-foreign-investors)

中国海关 AEO 认证:可信贸易商的”绿色通行证”

概述

对任何跨越中国关境移动货物的外商投资企业——进口零部件的外商独资企业、出口成品的合资企业,或代表处的采购机构——海关待遇从来不是”中立”的。一家”常规企业”与一家”经认证的经营者”(AEO)之间的差别,可能就是常规查验与近乎无感通关之间的差距。2026 年,中国进一步收紧了这一区分:企业信用管理规则全面重写、新增中层的认证企业等级、认证标准也焕新落地。

本文说明 AEO 在 2026 年框架下意味着什么、谁有资格、带来哪些便利与义务、与旧三级制的区别,以及外商投资企业应怎样具体地去争取或善用 AEO。本文仅为信息参考,具体标准与资格请以海关总署、主管海关及合格中国法律顾问为准。

2026 年改了什么

两份文件界定新格局:

  • 海关总署令第 282 号《海关注册登记和备案企业信用管理办法》。 2025 年 12 月 30 日署务会议通过,2026 年 1 月 13 日公布,2026 年 4 月 1 日起施行,取代 2021 年版,是海关信用管理的法律主干。
  • 重构的认证标准。 海关总署 2026 年 3 月 31 日政策解读,修订《海关高级认证企业标准》(原 2022 年第 106 号),并制定《海关认证企业标准》,均与第 282 号令同步于 2026 年 4 月 1 日实施。

最突出的结构性变化:信用等级由三级优化为五级——高级认证企业、认证企业、常规企业、失信企业、严重失信企业。关键的是,第 282 号令第八条明确高级认证企业与认证企业均为中国 AEO 企业,海关据此与其他国家或者地区海关开展 AEO 互认合作,并对互认企业给予相关便利措施。

为何 AEO 对外资贸易商举足轻重

数据最有说服力。据海关总署,截至 2025 年底,全国 AEO 企业 6,876 家,仅占进出口实绩企业的约 1%,却贡献了全国近 40% 的贸易额。用海关自己的话讲,AEO 资质既是国内通关的”VIP 通行证”,也是开拓国际市场的”绿色通行证”。

具体而言,AEO 企业获得一组便利措施,通常包括:

  • 优先办理海关手续;
  • 降低监管频次,如更低查验率、更少例行检查;
  • 优化服务,如多地提供的预申报辅导与专属协调员支持;
  • 互认红利,在与中国有 AEO 互认安排的经济体贸易时,对方海关给予同等便利。

对外商投资企业而言,其价值是实打实的:口岸停留时间更短、合规与滞箱成本更低、通关预期更稳定——对时令货物或大体量供应链尤其珍贵。

新的五级阶梯与信用修复

除厘清 AEO 外,2026 年改革也回应了中小企业的诉求:

  • 新增中层的”认证企业”等级,为低于高级认证、高于常规企业的主体提供台阶,拓宽更多贸易商享受 AEO 待遇的通道。
  • 信用修复机制,对失信信息形成”失信惩戒、便捷修复”的良性循环,激励企业珍视并主动修复信用。
  • 容错机制,在明确情形下为 AEO 企业与失信企业均给予纠错空间,支持稳定经营。
  • 更健全的适用范围,更一致地将信用管理延伸至各类注册与备案企业。

这对外国投资者意义重大:它表明中国海关制度日益以信用为本——良好的合规历史可转化为切实的通关优势,而一次过失未必是永久壁垒。

2026 年认证标准

2026 年 3 月 31 日的解读阐明了标准的”为何”与”何为”:

  • 框架延续且细化。 “通用标准 + 单项标准”架构延续,但通用标准细分为进出口货物收发货人与报关企业两类,反映其不同的风险与作业画像。
  • 国际对齐。 修订主动对接世界海关组织 2025 版《全球贸易安全与便利标准框架》(SAFE),该框架要求 AEO 覆盖中小微企业,并强调合规记录、供应链安全承诺、商业记录管理与财务可行性。
  • 减负提效。 针对企业反映”指标繁琐、财务要求不够灵活、中小微门槛偏高”的诉求,修订提升标准适配性与可操作性,降低中小企业的实际门槛。

简言之,企业须在内控、财务、合规历史、贸易安全等维度证明符合适用标准。海关提供信用培育服务,在企业申请前后帮助强化诚信守法意识与合规水平。

谁能申请,以及流程

AEO 不限于内资企业。任何在海关注册或备案的企业——包括外商投资的外商独资企业、合资企业、代表处采购机构——只要符合标准均可申请。

典型路径:

  1. 尽早对接主管海关参与信用培育;海关明确将企业信用培育作为信用管理制度的重要环节。
  2. 对照适用标准自评(高级认证或认证;收发货人或报关企业变体)。
  3. 通过指定海关渠道提交申请并接受认证审核。
  4. 持续维持标准——AEO 基于持续合规授予,而非一次性检查;海关已就高级认证企业简易复核公布相关程序。

下一步建议

  • 现在就开启培育对话。 若进出口量可观,主动向主管海关了解信用培育项目,而非等问题出现。
  • 将 2026 版《海关高级认证企业标准》映射到自身合规体系。 识别内控、财务单证、贸易安全、既往合规记录方面的差距,有针对性地补齐。
  • 把 AEO 用作供应商筛选信号。 在华采购时,AEO 认证供应商在统计上风险更低、通关更快——这与我们采购供应类文章中的尽职调查流程直接相关。
  • 在境外善用互认。 若你也在与中国有 AEO 互认安排的经济体运营或中转,协调两套认证以叠加通关红利。
  • 建立信用修复与容错预案。 熟悉程序,使今日的整改不会在明日变成永久的失信状态。

实操示例

瑞士投资的苏州外商独资企业”Helvetia Components”进口精密零件、出口总成至亚洲各地。受周期性查验打乱准时制交付所困,它于 2026 年初报名参与主管海关的信用培育,将自身内控与贸易安全单证对照新版高级认证企业标准,并补齐了货物流向追溯记录的短板。认证后,其查验频次下降、通关可预期;又因瑞士是中国 AEO 互认伙伴,其欧洲流向也随之顺畅。经验是:AEO 不是一张纸质奖状,而是一项跨越关境会叠加放大的结构性通关优势。

来源

  • 海关总署——第 282 号令《海关注册登记和备案企业信用管理办法》(2026 年 4 月 1 日施行):http://www.customs.gov.cn
  • 海关总署政策解读《关于公布〈海关高级认证企业标准〉〈海关认证企业标准〉的公告》(2026 年 3 月 31 日):http://gec.customs.gov.cn/customs/2026-03/31/article_2026033118200739179.html
  • 海关总署新闻《海关信用管理优化升级——助企惠企激发外贸主体活力》(2026 年 2 月 13 日):http://www.customs.gov.cn/customs/2026-02/13/article_2026021311434812790.html
  • 国务院公报(官方门户):https://www.gov.cn/gongbao

相关阅读

  • 参见:进口货物”两步申报”全面推广与申报管理规定修订(69-two-step-customs-declaration)
  • 参见:进出口许可与海关清关(50-import-export-customs-clearance)
  • 参见:RCEP 红利与外资投资者(42-rcep-benefits-foreign-investors)